Question Locked

How to Join SBS Domain over VPN

0 helpful
26 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

OK so I have SBS up and running ? AWSOME!!!

My question?

I have locally a Linksys RV082 VPN router (with DHCP off and handled by SBS). When I create a VPN tunnel from my remote (2 hours north) all looks good. VPN connection is made and I can ping the server and all clients at local site by IP but not by name, why?

I attempted to make the remote computer part of the domain (after VPN was up) but it does not find the domain.

In past (before SBS) the VPN came in and fond all resources on the peer to peer I had. I could ping IP and name and all database sharing worked.

So?
1)How do I get to ping on name? Looks like DNS is not happening on SBS server?

2)How do I get the remote computer to become part of the local domain via the VPN?

Thanks!

26 replies

by mellow52

Common help me on this one.

Have you helped a noob today?

Thanks guys!

by mellow52

I did a ipconfig /all on the server and took that DNS and made it the default on the remote. Still not working.

From the remote I can see all domain computers but cannot access them.

I am thinking this is a permission setting on SBS but I cannot get the remote to join the domain so how can I get to log-in as a user that SBS will give rights to?

Yelp!

by mellow52

I got the remote computer to ask at login to choose between (a) local computer login or (b) the domain login

Well I cannot connect to the domain since the VPN is not up. I have to login onto the computer first via local login (as standalone) to start my VPN software but then do not have a way to logoff and back onto the domain without losing the VPN.

How do I do this? It looks like I have to have the VPN up before I try to login to the domain. Should I get a VPN router to VPN router and not (as it is now) VPN software client to VPN router local?

Is VPN router to VPN router always on and will this solve the it for me?

by churdoo

Been out making money and didn't see your posts.

I can speak to your first post, but since you've already got the remote workstation joined to the domain, I won't waste the space.

Are you using the Linksys QuickVPN client or the built in MS VPN client? I don't think the QVPN client will install as a 'service' so it can be active for you to log into the domain.

With the MS VPN client however, you can specify at login time to "log in using dial-up connection" where you can select the VPN client so that the VPN connection is made prior to the domain login. You will probably have to go into the networking properties of the VPN client and set DNS properties within the client to point to the SBS server at the home site. This will make for better name resolution of the AD while connected to the VPN.

Although as you can see above, you may be able to make this work with a Router / VPN client setup, your best bet is a router/router VPN tunnel. Yes it is always on, and will be cleaner and probably less troublesome than using a VPN client.

Admittedly, I've had spotty success with the linky RV0 series routers' VPN functionality, so you may find yourself switching to something with more robust VPN capabilities like a Sonicwall.

by mellow52

I want to be like churdoo when I growup!

MS VPN with dail-in option at login did it!

will look at SoniCwall

Thanks mate!

by cg it

it's in the client apps folder. you can modify this for users with all the parameters you need and give it to employees to use.

by mellow52

Up to this point I am having no fun with VPN.
I got MS VPN to connect to my Linksys RV082 at login to the domain.

I can ping anything but programs like OneNote does not want to stay connected to the data file on my SBS server. Outlook wants to configure at first run but cannot resolve the user name?

I am looking now to go Sonic router both ends. SONICWALL TZ150

by mellow52

CG IT you got me thinking so I went back to the basics. After the VPN tunnel is up, MS VPN (remote) to Linksys VR082 (local) I did a ipconfig /all and found this?

Remote PC:
Under Nic
IP: 192.168.1.100
SM: 255.255.255.0
DG: 192.168.1.1

Under PPP
IP: xx.xx.xx.30
SM: 255.255.255.255
DG: xx.xx.xx.30

I found this on my server:
IP: xx.xx.xx.101
SM: 255.255.255.0
DG: xx.xx.xx.1
DNS: xx.xx.xx.101
WINS: xx.xx.xx.101

So the remote not only has a different Subnet Mask but the Default Gateway also does not match but yet I can ping with no problem.

Now the IP that the remote PC shows under PPP was given by my router when I turned on PPTP Server and was not given by SBS DHCP.
Could this be why exchange will not connect? I turned off the PPTP Server in the router with only PPTP pass through left on. I forwarded port 1723 but get only error 800 when I attempt the VPN connection.

I think the 800 error is because my router PPTP server is off and SBS is not acting as one. I did enable VPN in SBS.
I went to my ISP control panel and created a DNS for my external IP (dynamic not static) but that just comes up with the 501 error.
Looks like SBS is not serving on my external IP or its DNS.

Any thoughts on all this?

by cg it

PPTP requires both TCP 1723 & GRE47

many minimally configurable routers [consumer level or small business] don't have a way to open GRE and PPTP passthrough doesn't do the trick.

This is why when I saw you using the linksys Router I mentioned RWW on SBS.

Also if that linksys is PnP, you might consider turning it on and let SBS see that it is a PnP router[run CIECW wizard note: whenever there is a connection to the internet problem run CIECW First. Running it often fixes problems and you can't hurt SBS by running it, except if you manually configure SBS which you shouldn't ]. That might possibly solve the GRE 47 problem [no guarantees]. That's why DMZ works with no problems where if you put the SBS box behind the router firewall, it no longer works... GRE.....

I hope you ran the Remote Access Wizard? if not, go back to the things to do list and run that. don't manually configure SBS if there is a wizard that will do it.

and don't run DHCP on anything but the SBS box, and if your smart, you'll use the dual NIC configuration. That allows the Windows Server firewall to be turned on. 1 NIC the Windows firewall is disabled.

If you do put in 2 NICs rerun the CIECW and Remote Access wizards.

Have you looked in DHCP for the PPTP miniport address assignments? normally you should see 10 addresses for computers on your LAN that you didn't have before. 5 of those are PPTP miniports 5 are L2TP miniports.

oh and BTW you should know that 255.255.255.255 is an invalid mask on IPv4..

by churdoo

Look into using the native SBS VPN. This will save you some $$$ and will likely be easier to learn than the sonicwall. You could use either solution, but I think the SBS VPN may be easier.

If you're using port forwarding from your RV0 to your SBS for its other functions as opposed to DMZ'ing the whole box, you'll just have to add port 1723 to your list of forwards to test/implement the SBS VPN.

by mellow52

OK I will give it a go, so...

I will turn off VPN on router and make hole in firewall to use native SBS VPN.

Does remote login the same way to the domain at start up check dail-up box?

by cg it

and that is to use Remote Web Workplace.

you don't need to open up any ports on the firewall and users will be able to remotely connect to their desktops.

another avenue is gotomypc though sometimes that's just not a safe way to do things...but you don't need any of the problems with VPN

BTW though a LOT of consultants use SonicWall, they do so because of the $$ they get for selling it, not for it's low cost to their customer. SonicWall TZ 170, though a decent device, has all these add ons that cost a bundle every year to renew. One is the global VPN client program.

by mellow52

Here is the funny thing.. the VPN is up, I Can ping all IP's and names even the server by name but when I open Outlook for the first time it does not want to ConneCt to the exChange server. Also OneNote does not stay ConneCted to Complete a synC!? VPN is up. Tried deleteing e-mail profile, and loging in as diffrent user with no Change. If log in loCal all is good but it will not work over the VPN.

and now my C key is not workin in lower Case :o(

by cg it

and when you run the remote access wizard, it create PPTP & L2TP miniports which are assigned LAN adddresses by DHCP [remote access pool]

remote users use these PPTP and L2TP miniports to connect as if they are on the LAN.

For an SBS box, the best way to give remote users access to Outlook, the internal company web site, and remote desktop is to use Remote Web Workplace.

It's the least frustrating and is the most reliable way I've found .

by mellow52

Yes SBS has DHCP and I did run the wizard.

The router has UPnP with a long list of services to choose from. L2TP, DNS, HTTP, HTTPS, FTP, IMAP and so on. All of these I can configure ports. What should I choose?

It also asks for name or IP, is that of the server?

by cg it

if you run the CIECW wizard, when you get the to part where it asks if you have a router, and configuring the ISP DNS and router addresses, there will be a check box on the lower left side about PnP. if you check the box, the SBS box will automatically detect and enable the appropriate services on the SBS box. That way, you might and I stress might not have to open up ports.

This sometimes works and sometimes doesn't work because each router handles uPnP in different ways.

but to answer the question basic VPN without IPSec is PPTP.

by mellow52

OK when I open the port 1723 It asked for an IP with it. I thought this is the IP to be assigned so I just gave it one in the range. Well I changed it to the server IP and bing.
Outlook connected to exchange SO FAST you would think it is local.

Is there any security issues here?

CG IT and churdoo... guys thanks from the bottom of my heart. I nearly lost it ;o)

Any reason why I can not access my server from the internet? I created a dynDNS pointing to my dynamic IP (that has not changed in months) and when I type in that URL I get the login box but it will not accept my admin login?

by cg it

port forwarding means you forward traffic on that port to a specific computer on the LAN.

I assumed you already knew this, by virtue that you are working on a SBS box and trying to setup VPN.

if you want to use RWW then you have to turn it on with CIECW

and the URL is https:///remote

by mellow52

OK I ran the CIECW but many times but my RWW does not show.

I am not using SBS firewall. Router has that.

by churdoo

... besides about a million thumbs? :-)

Thanks CG for taking over while I was out making money; I read the posts -- nice work! Mellow, what's left? I'm sure all of us TR geeks can help guide you through the rest?

by cg it

besides I'm trying for 900 before New Years... and now that I said it I won't get anymore ROFL...

by cg it

in the things to do list

server management console in the left pane up at the top

by mellow52

OK I ran the CIECW but many times but my RWW does not show.

I am not using SBS firewall. Router has that.

by mellow52

Well there is a few more "small" issues I going to start a new thread on RWW, still no bliss there but let me tell you my VPN is rock solid.

Thanks again!

This discussion is closed to new replies.