9 replies
by akhatamgoya
by revloc
by tmaclennan
Set up the printer with an IP address and turn off any extraneous protocols befoe you start this.
Setting up the queue:
a) Login to the PDC at the console
b) Choose Start/Settings/Printers
c) Double-click "Add Printer"
d) Make sure the "My Computer" radio button is selected; click Next
e) Click the "Add Port" button (if this is a new queue for an existing printer, find and check the correct TCP/IP address, and skip to step i)
f) Select "LPR Port" and click the "New Port" button
g) As shown below, enter the TCP/IP address and PASSTHRU as the port, then click "OK"
h) Click "Close"
i) The port will appear with a check in the scroll box, click "Next"
j) Select the driver for the printer. This is the Windows NT driver that the Serverwill use if you print from the server. The PCL driver (non-postscript) prints faster.
k) Put in a descriptive printer name, then click "Next"
l) Click the "Shared" radio button, and then click on the Windows 95 operating system. If you anticipated that computers with other operating systems would want to share the computer from this server, you would control-click those operating systems as well. Then click "Next"
m) The printer drivers for Windows 95 can be found on a Windows 95 CD. I extracted the drivers from the CAB file and put them on a W95Print share for ease of use. Select the driver for Win 95. Non-postscript prints faster.
n) Test the Win95 side by going to a PC, browsing to the printer and double-clicking to install the printer and print a test page.
by revloc
by redshift
Local printeres can be added by:
1) Open My Computer
2) Printers
3) Add Printer
4) Printer wizard takes care of the rest, but have the drivers disk on hand.
by revloc
by dave
I presume you want to share this printer through NT 4.0 Server in otherwords, the users connect to the server to access the printer and the server acts as a buffer for the print jobs. This is the normal situation.
The next question is where is the printer to be located of which there are 3 answers; 1) directly connected to the NT server, 2) Connected to another computer on the network and shared, or 3) hung of a print server (which may be internal or external to the printer).
Once these situations are determined thenyou can configure the server settings to share the printer. Some of the other replies to your post cover how to do this.
Dave Kemper
dave@dave-kemper.com
by revloc
by revloc
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending