Discussion Locked

HP CDWriter Won't burn MP3's

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a friend/client who recently rebuilt her PC. As part of the rebuild she had a HP CDWriter R/W drive installed. This works ok when writing data but will not burn MP3 files.

It is installed as the slave to a read only CD Rom drive. Both ofthese are on the secondary IDE bus.

Operating system is Windows 98 and she has installed Adaptec Easy Cd Creator which comes with the drive. The drive was bought new from a computer store.

I Haven't seen the insides of the PC yet but I believethe mobo/processor is a fairly new AMD.

I have looked all over the HP website for drivers for the R/W. I have also tried www.drivers.com I had her try Nero Cd Burning software on it. None of these approaches worked.

Do HP Cd Writers have a known software issue, has anybody else had this kind of problem with them ? Is there a hardware/compatability issue here ?

Are there any "general issue" CD R/W drivers that can be used on this device or do we have to stick with the HP drivers

Any help you can give me on this one is much appreciated.

Thanks

Eujay

19 replies

by mphoffar

I guess I'm confused. Are we trying to burn MP3 files so the end product is an audio CD that she can play in the car or home system or are mp3s the only data files that can not be written to a CD-Rom?

It's make a difference here because in the first case, there no driver around that'll allow you to do that, that's something you're looking at the adaptec software to do. You said the Cd is burning data, so this leads me away from a driver as it is. Common things I've seen people do would beto make sure this is that the CD session is being closed and were using CDs which can accept music (not all do). This uncludes Read write CDs. Basically you just want read only.

There is an incompatability with some versions of direct CD with win2000, but I don't believe this is what you're running.

Good luck to you

Mark

by jwilczyn

i recommend that you use Winamp to change the file into a .wav file first, and then try to burn it.
First you go into preferences, then into plugins - output
and then select Disk writer plugin to make it a wav. change back after you make them intoa wav, to waveOut

then try to record the wavs onto a cd

by herman

I was just reading an article that said the software supplied with the burners do not have a lot of "extras". You might look at "Adaptec's Easy CD Creator 4 Deluxe" it is suppose to have the feature of converting mp3's to audio -

by cdobbin

All the answers here sound correct, if she's burning MP3's to disk and attempting to listen to them on a home or car sterio it will not work, tell her to put the cd's she has made in here pc and try and play the songs through winamp or something.
Sterios need "wav" or "cda" format to operate correctly.
I would not say it has anything to do with drivers or a hardware issue at all, if it burns "data" then it will burn "data", weather or not its the correct "data" format to do what you want to do, is the question.
I hope that last statement was not to confusing.
Hope this helps.

by rob k.

As in answer #1 I have seen people try to write music cd's with MP3's. If this is the case you will have to extract (rip) the song into a music (wav ) format. You should then be able to record them onto a music CD. If you just want the cd to containMP3's ( not ripped) then you will want to create a data cd.

Hope this helps
Rob K.

by buffalodan

You should have no problem whatsoever writing any file type to CD.

What I suspect is happening is Known as a "Buffer UNDERRUN error". In which the cdburner's buffer runs out of data before the next file to be written is cued into the buffer. Thishappens often when writing large numbers of smallish files to CD.

The buffer runs out of data, but the CDRW drive needs to continue writing...(cd tracks are continuous..), and winds up writing null bytes to cd.

You can solve this by...

Opencontrol panel, select "system", choose performance, choose "file system", select the CDROM tab, and reduce the buffer size to about 1/2.

Note, this affects all CDROM Drives installed.

Another fix, would be to create an image file from your MP3Collection, and thus allow you to make one continuous write operation.

The ultimate fix would have you BUY ALL YOUR MUSIC>>>>>>but this is not always possible,
since we spend all our money on new computer toys and such...;-)

the buffer is theproblem...reduce buffer size or create an image file before recording. (reducing the size of the buffer is easier.)

Good Luck.

by some guy in seattle

This is probably completely off-post, but I have found that CD-Creator is not robust enough for what I need to burn. I have found that I have to disable everything like background TSR programs (virus-scanners, etc.) and the screen saver in order toburn a disk without errors. And during the burn I cdould do nothing else on the PC until it was done.

Having said that, I have found that a burning program called Nero (www.nero.com) is about the best burner there is. No other applications haveto be disabled, you can use the PC while it's burning, and it works great for those CDs with 10,000 small-sized files.

Just my 2 cents! and hope that helps,

by jminard

Have you tried different CD media type, also make sure there is any TSR's that could be affecting this. I have Nero and I love it. I also had adaptec and sometimes it would do that to me if I had something running in the background. I usually use a program called CDEX to convert the files to cda format and then I try burning them.

by eujay

Thanks to everybody for all the information. You have all given me some good leads. I will get to work on this.

Thanks you guys have been soooo helpful.

Eujay

This discussion is closed to new replies.