9 replies
by garetjax
A couple of questions: Are you printing to the CLJ 5M via a PCL or PostScript print driver? The reason I ask is I saw a similar issue with an HP LaserJet 4X00 3-4 years ago at a former employer.
Try using the different print driver options:
HP PCL5, HP PCL 6, Microsoft PS, Adobe PS
Also try from a couple of different systems.
Good luck.
by mjohnson
by strakovsky
AFAIK, you may have two possible problems:
1. On-board printer memory screwed
2. Missconfigured printer driver [memory settings]
To find out what's wrong, you have to read the manual [Troubleshooting]. If you don't have one, try this:
1. Turn printer off-line (don't power off)
2. Press and hold "Test" button until you see testing status on your LCD-panel.
3. Read the test page to obtain exact amount of installed memory.
4. Check the amount you have installed in Printer Properties->DeviceSettings->Installed Memory (Kilobyte).
If the test page gives you definetely wrong figure, check your memory modules (if you don't know how, I'l give you advise later on). If your driver referred to incorrect memory size, correct it by test page amount.
by mjohnson
by mind_nt
Try to use the hp4 pcl driver for your printer in the pass i had that problem to al resolve with this driver
Good luck
by mjohnson
by daniel
by mjohnson
by mjohnson
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending