Discussion Locked

HP Printers and Windows98 - printing gar

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I've had problems with both an HP 5 printer and now an HP Laserjet III P printer and Windows98. They worked at first then started printing garbage. I have tried removing everything about the printer from the registry and from Win.ini and System.ini and reinstalling the printer, but it still doesn't work. Any ideas?

8 replies

by harryluve

hello,

I had a similar problem with my laserjet4050 and I tried all that stuff. Then I went to walmart and got a new printer cable and it worked again.

Hope this helps

by Member 36823708

I've tried different cables. I was able to take the printer and cable to my PC and it ran fine (WinNT workstation 4.0). I had the same problem with a Win98 PC and HP5 printer - my solution was to connect the HP5 to a Win95 PC instead of the Win98 PC. (Not really a solution.) Thanks for trying to help!

by pete haring

I have found that sometimes it is better to get rid of the garbage by using an older or generic driver for the printer. you may loose some frils of the printer, but it will work.
Thanks

by Member 36823708

I've tried every kind of driver I can find and still get the same gibberish. I'm convinced it's a Windows98 problem. Thanks for all the input anyway.

by robertp

I have the same problem with a Cannon. When I changed the format to RAW the prints came out good and sped up alot.

by charley

I realize that this sounds odd, given that your display, apparently, works just fine. However, when you print, windows performs what is, essentially, a screen dump. That means that you need to ensure that both your print and video drivers are in good shape.

I would try a) removing the print driver, including all references to it, from the registry, b) updating the video driver, preferably with reference drivers from the manufacturer (i.e. nVidia, 3dfx, etc.) rather than the vendor (i.e. creative labs, Diamond, etc.), c) reinstalling the printer with current drivers from HP's web site (in the case of the LJ5).

This discussion is closed to new replies.