Discussion Locked

HP scanner/NT - so much for HP invent

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I owe this one to the community.

A few weeks ago, I desperately cried on the Net (including here) in order to get a solution to my problem: HP 6270 A scanner with ADF support connected to NT 4 workstation SCSI interface. Scanner was scanning governed by misterious laws, sometimes YES and most of the times, NO. I've tried everything (from reinstalling a few times the NT WRKstation, to contacting HP hotlines or using the scanner on WIN98 systems on SCSI or USB interfaces). Nothing worked.
I've contacted a few HP authorised services, and they have told me the internal SCSI interface is working randomly after a few scans, so needs to be replaced together with the lamp. IS IT POSSIBLE?
They prepared to charge me for replacing the interfaceand the lamp for a price 40% higher than a new 5370 HP scanner model.

As I've experienced problems with other HP machines too (eg. HP external CD writer 7200e), I don't know what to do - replace interface and lamp, buy a new HP scanner or f**k'emand switch definitely to other PC industry big name? This is a tough decision as we, as a company, based our network on working COMPAQ workstations and these pain-in-the-bu*t HP peripherals.

3 replies

by msgtray

I don't know if I am wasting our time with this answer because I have no direct experience with this model HP scanner. The one HP SCSI scanner I did deal with was very quirky.

I fought this scanner for about an hour. Talking with my boss, a Novell guy (I am hanging my head in humble shame), advised me to change my approach. I unistalled everything, software AND hardware. Then (and this is important), I installed the Software first, without the scanner OR the SCSI card installed. Once the software installation was complete, I shut down the system, installed the hardware and everything worked great.

The only explanation that I have is that the programmers at HP must have their feet on backwards, because their software is definately different.

This may not be your problem, but in your shoes, I would try it before I started replacing hardware.

Ray

by cd

Thank you for your time, but I decided to change the company when buying, at least scanners. EPSON is a good alternative.

This discussion is closed to new replies.