5 replies
Hi,
All of them have in common that they split one network cable into many. The difference lies in how and why its done.
A hub propogates the signal out all its ports regardless. Kind of a broadcast.
A switch in general has intelligence built in to only foward the signal to the port that it needs to go out. So is more point to point.
For a detailed explanation on what implementing the switch at a particular network layer means, check out...
http://www.blackbox.com/tech_docs/tech_overviews/switching_overview.html
(remove spaces from the above URL)
A router is like a switch except is has the added possibility of taking a signal from one network and making the appropriate adjustments to the data and passing it off into another network.
Hope that helps,
Cheers,
Tim.
by spaingankar
by prashanthp
Hi,
First let me tell you in brief about Broadcast(BD) & Collision domain(CD). In BD domain every machine receives traffic sent by one machine. In CD domain every traffic is seen by every other machine as in a hub.
A hub can be thought of as multiport repeater, all the segments belonging to one collision & broadcast domain irrelevant of how many segments u have.
A layer 2 switch is just an improvement over hub where you can have different segments in diff. collision domain but one broadcast domain. So if there are 3 segments 3 CD & 1 BD. Note that one segment will be connected to one port.
A layer 3 switch is also called routing switch.Here the routing is done in Hardware rather than software as is done in a router. A Router is a relay device which sends traffic from one network to another network. It divides both broadcast & collision domain.So if there are 3 segments, 3 CD & 3 BD.
I hope this clears your doubt to atleast some extent.
by spaingankar
by spaingankar
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending