Question Locked

Humidity in the data center: how low is too low?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

In my home data center I monitor for humidity with a RackBotz monitoring appliance in the server rack.

This morning it's sending me low humidity alarms, as it's showing 16% humidity.

I've read about the 'triboelectric effect' where components can fail due to ESD (electro static discharge) happening without human interaction. Anybody ever seen that happen?

Obviously I will use my static grounding strap when working in the server rack at this humidity.

Maybe Sears has a sale on humidifiers.....

7 replies

by oh smeg

I've seen Low Humidity adversely affect other electronics. Most notably in Repair Situations where a improperly grounded tech gives the Device a ESD Hit when they touch it.

With Low Humidity Static doesn't bleed off anywhere near as fast as when the Humidity is higher but having said that there are numerous other factors that come into play.

Just make sure that you have good earthing and things tend to be OK.

I hope that is of some use. ;)

Col

by santeewelding

An ephemeral concern, due only to what you have read.

Where I am, low, single-digit humidity is not unknown, for days on end. Brush fires, yes; but a bonfire of electronics? Not that I've heard or experienced myself.

______

Add: so low, that it makes the calendar page on the wall curl up.

by robo_dev

that seemed to coincide with low humidity.

I've seen expensive parts get zapped with ESD, so I know not to do that again.

Once a girlfriend walked across the carpet to adjust the volume of the TV, and ESD blew out the audio circuitry of the TV when she touched the volume control.

by papa_bill

...especially ladies who are concerned about dry skin.

A whole house humidifier might be worth the investment if the air stays that dry in heating season, otherwise your equipment room A/C Is probably the culprit if it's set below about 60.

But I tend to agree that later equipment is not as prone to ESD damage since most chip ports are protected by zeners now.

by gario

is what most data center strive for, but as i understand this is your home at 16%. I know this sounds crazy but you can Boil a pot of water or use a water air cooler.

This discussion is closed to new replies.