Question Locked

I Accidentally delete a Registry Key and my whole computer become...

0 helpful
32 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok...i delete more than 4 registry keys...i though it will be ok for me and then it is from bad to worse...
i deleted from [Registry Editor -> HKEY_CURRENT_USER -> Software -> and then Delete more than 4 keys inside]

when i finish Deleting some of the registry keys...then i go to [Start -> All Programs], i saw all my shortcut icons has became unknown icons,then when i press a program, it says...

Window cannot open this file
File: [any programs]

what do you want to do?
There 2 option and then when i press ok...
First option...the browser can't be open.
Second option...the program lists ARE NOTHING INSIDE!

Run Command - When i press [Start -> Run -> explorer.exe -> OK ], it will say the window cannot open this file AGAIN...

System Restore - After the deleting and found all the solutions, i go..[Start -> All Programs -> Accessories -> System Tools -> System Restore], It also say Window Cannot Open This File...After i do all the solutions and reboot the computer... In the Desktop, there nothing and i can't open the explorer.exe...

Anyone can help? if not i must asks the Professional to fix my computer..it will also costs me some money but i want to do it by myself!!! >.<

I don't Know which Primary Tags i must press : P sorry.

Vinnie

32 replies

by rob miners

1. Click Start.
2. Point to All Programs.
3. Point to Accessories.
4. Point to System Tools.
5. Click System Restore.
6. Follow the instructions on the wizard to restore to an earlier point.

by supersoniczx

I Can't open Explorer.exe...and then the system restore...

by rob miners

To start the System Restore tool from a Command Prompt.

Restart your computer, and then press F8 during the initial startup to start your computer in Safe Mode with a Command Prompt.

Log on to your computer with an administrator account or with an account that has administrator credentials.

Type the following command at a command prompt, and then press ENTER:

%systemroot%\system32\restore\rstrui.exe

Follow the instructions that appear on the screen to restore your computer to an earlier state.

If you can't enter Safe Mode try this.

Boot the system using the Windows XP CD-ROM. In the first screen when the Setup begins, read the instructions press "R" (in the first screen) enter the Recovery Console.

1: C:\WINDOWS

Which Windows Installation would you like to log on to (To cancel, press ENTER)?

After you enter the number for the appropriate Windows installation, Windows will then prompt you to enter the Administrator account password.

Note If you use an incorrect password three times, the Windows Recovery Console closes. Also, if the Security Accounts Manager (SAM) database is missing or damaged, you cannot use the Windows Recovery Console because you cannot have correct authentication. After you enter your password and the Windows Recovery Console starts, type exit to restart the computer.

Type the following command and press Enter.

Type CD\ then Enter

Then type cd system~1\_resto~1 then Enter

Type dir then Enter

When you hit enter it will list all the restore points folders like rp1, rp2 ??.. If the restore points have more than one page then you will have to keep on hitting the key to view the last restore point folder. You will have to choose the second to last option folder

Type cd rp {the second to the last restore point no. } (Note: Example: cd rp9, if rp9 is the second to the last restore point where the last restore point no. is 10

Then type cd snapshot

Now the command prompt will look like this c:\system~1\_resto~1\rp9\snapshot

Type: copy _registry_machine_system c:\windows\system32\config\system

Press enter

Then type: copy _registry_machine_software c:\windows\system32\config\software

Then type exit

TIP!.

If you get an access denied error when doing the above, then do the following at the recovery console:

Type CD\ then press Enter

Type cd windows\system32\config then press Enter

Type ren system system.bak then press Enter

Type exit and press Enter

Your PC will reboot, go back into the Recovery Console and then you have access.

by supersoniczx

I have follow all the steps and can be open the system restore in safe mode with Command Prompt... in the system restore, i only can see white screen and nothing there...

ok... all the programs are become unknown programs and it will not work any more...
Can't open browser and other pc games...

by supersoniczx

when i put the window xp home edtion SP2 CD.
It never came out any setup.... it nothing there.... how?

by peshwa

instead of going for all the complications its better u repair the windows xp...
all the registers will be restored and all the softwres u installed ll be as it is..

by supersoniczx

you mean...

1) i must install window xp in my computer???
[Fail. The CD drive can't be open and i can't see any D:\ or any drivers in my computer...]

2) reformatt?
[HOW???]

3) tell the professionals to fix it?
[it will cost me some money...]

4) i must buy the hardware...more money... and also need my need to install window xp when my computer is other version[ Vista, 7 and etc.]

by el_duce

You need to insert your windows cd in the cdrom and (re)boot your pc. If it still loads the faulty windows, reboot again and enter your BIOS (by either pressing del or f2, or whatever key your system shows on boot to enter setup) In your bios search for the boot order and change the order.

Once you've booted from the CD (so without the faulty windows gets loaded) you can run repair or reinstall, whatever you like.

by peshwa

insert ur xp cd in the cd drive..
if the cd drive isnt opening then restart ur pc and then open the cd drive at the starting of booting(it will open) and then restart again...
then the cd ll boot and then u can repair or install...

by supersoniczx

what is the meaning ''the starting of booting(it will open) and then restart again'' ???

by supersoniczx

the cd drive can't be open for ever... the C:\,A:\ and D:\ didn't show in My Computer its nothing.......

by supersoniczx

my brother help me do it already...it will come out Blue screen of death.... i think i have no hope for my gaming pc...

by peshwa

i hav one question..

u know how to install windows xp??

by supersoniczx

1) at the desktop there nothing, when i put the cd inside and it does not load anything but the cd drive still work.

2) when starting to boot up the computer i open the cd drive and then restart again... then until the desktop i insert the cd... and it still nothing...

by supersoniczx

1) at the desktop there nothing, when i put the cd inside and it does not load anything but the cd drive still work.

2) when starting to boot up the computer i open the cd drive and then restart again... then until the desktop i insert the cd... and it still nothing... and my brother say he also know the steps and get blue screen of death...

by seanferd

You may have to go into BIOS setup and allow computer to boot from CD drive. Also, CD drive should be before HDD in boot order.

Watch when computer boots to see something like, "Press (some key) to enter setup".

by peshwa

may be xp cd u hav is unreadable due to some deep scratches..

y cant u use a different xp cd and try loading it..

by el_duce

Make sure the CD with windows is in de cd-rom. Is it? Ok, now turn off the pc and unplug the power cord. wait 30 seconds. Now plug it back in and turn your pc on.

Does it bring you back to the desktop or to the windows setup?

If you get the desktop repeat the first part, but on boot go into bios and allow the booting from cd-rom and put it before HDD and save the settings.
Repaet first part of this post once more

by seanferd

Put CD in drive.
Turn off computer.
Turn on computer.

Now you should be booting from the installation CD.

----

If you still do not boot from CD, you will need to enter BIOS setup, and make sure that the computer will 1) boot from CD, and 2) Cd comes before hard drive in the boot order.

Watch the screen at startup to see which key to press to enter BIOS setup.

by supersoniczx

sorry that i need to log in another account..

i do that...when the setup really nearly come out... the blue screen of death is out....

there no helps for this?...i must tell professionals to help me or i need to buy new hardwares....

by older mycroft

There is not a snowball in hell's chance that anyone incapable of booting from a CD could possibly have wreaked so much havoc within the RegEdit environment.

Furthermore, the Pidgin English has consistently DETERIORATED as the thread has grown its size and tech 'complexity'.

Maybe I'm just being an exceptionally Grumpy Old Fart today, but I ain't buying this. This thread is beginning to look like a Brian Rix Farce. :^0

by xzxvinniexzx

i serious.... I want my gaming computer back to NORMAL..... when the window xp SP2 home edition set up COME OUT... then the Blue Screen Of Death[BSOD] COME OUT..... how to fix this?

by older mycroft

Careful now, think long and hard before you answer that question.

You wouldn't want to make the same mistake that you just have, now would you?

[i]"REALLY!!!....
i serious.... I want my gaming computer back to NORMAL..... when the window xp SP2 home edition set up COME OUT... then the Blue Screen Of Death[BSOD] COME OUT..... how to fix this?"[/i]

You're not supposed to be able to speak Engleeesh remember? [b]Maybe you learned it on the Singapore-China flight.[/b] ;)

by xzxvinniexzx

So now the question are out.

what did you mean '' Singapore-china flight?''

Singapore have 4 races. [English, Chinese, Malay and Tamil]. Chinese did learn something from china but china words are traditional. we are now using simplified so that we can easily write and read.

by seanferd

has changed between your accounts. "english, Singapore" to ",sgmfnlskgnl, China"

This is what Mycroft is after.

Your continually changing problem and some other things are making Mycroft think you are a hoax. That is, your posts remind him of a prior hoax event.

So, what is the BSOD error? No one can even guess what the problem is on such little info as "blue screen". The blue screen is there to give you the failure information. Please post this, as Jacky also asked in your other thread.

by rob miners

Turn on your System and press the eject button on your CD/DVD optical drive. Insert your XP CD and close the drawer.

If you were quick enough you should get a prompt to press a Key to boot from CD/DVD. Press a Key like the Spacebar or the Enter Key.

If you miss the prompt restart the System by pressing the Reset button. Do not remove the CD as this is what you want to boot from.

Boot the system using the Windows XP CD-ROM. In the first screen when the Setup begins, read the instructions press "R" (in the first screen) enter the Recovery Console.

1: C:\WINDOWS

Which Windows Installation would you like to log on to (To cancel, press ENTER)?

After you enter the number for the appropriate Windows installation, Windows will then prompt you to enter the Administrator account password.

Note If you use an incorrect password three times, the Windows Recovery Console closes. Also, if the Security Accounts Manager (SAM) database is missing or damaged, you cannot use the Windows Recovery Console because you cannot have correct authentication. After you enter your password and the Windows Recovery Console starts, type exit to restart the computer.

Type the following command and press Enter.

Type CD\ then Enter

Then type cd system~1\_resto~1 then Enter

Type dir then Enter

When you hit enter it will list all the restore points folders like rp1, rp2 ??.. If the restore points have more than one page then you will have to keep on hitting the key to view the last restore point folder. You will have to choose the second to last option folder

Type cd rp {the second to the last restore point no. } (Note: Example: cd rp9, if rp9 is the second to the last restore point where the last restore point no. is 10

Then type cd snapshot

Now the command prompt will look like this c:\system~1\_resto~1\rp9\snapshot

Type: copy _registry_machine_system c:\windows\system32\config\system

Press enter

Then type: copy _registry_machine_software c:\windows\system32\config\software

Then type exit

TIP!.

If you get an access denied error when doing the above, then do the following at the recovery console:

Type CD\ then press Enter

Type cd windows\system32\config then press Enter

Type ren system system.bak then press Enter

Type exit and press Enter

Your PC will reboot, go back into the Recovery Console and then you have access.

This discussion is closed to new replies.