10 replies
by dragonrider69 Accepted solution
by seanferd Accepted solution
by tobif Accepted solution
Try connecting your computer with an ethernet cable to the same router.
If it works well over cable, then we need to look into the wireless: signal strength, radio interference, wifi protocols
If the problem remains even with the cable, then there may be some problem with the router, firewall, site, internet provider.
by dragonrider69 Accepted solution
by tobif Accepted solution
If your internet speed anyway is around 10 mbps, do you really need an n-channel?
(The answer could be yes if you have a lot of internal traffic)
by enforcer drive Accepted solution
by seanferd Accepted solution
by enforcer drive Accepted solution
by seanferd Accepted solution
Most N implementations are not compatible across hardware. Could very well be one source of the problem.
As the channels were changed, that could have been a fix as well, if RF interference was the cause of the problem.
by seanferd Accepted solution
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending