Discussion Locked

i dont know?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
how does a CSMA/CD do to the network?

5 replies

by pschuvie

CSMA/CD stands for Carrier Sense Multiple Access Collision Detect. It is the method that Ethernet incorporates to move information around the network.

Here is a nice little write up that gives you and good little understanding about what it is and what it does.
http://www.ots.utexas.edu/ethernet/10quickref/ch1qr_6.html

If you want to know more about Ethernet then just start at www.ots.utexas.edu/ethernet

Basically CSMA/CD provides a network with a equitable mehthod of sharing wire space and knowing when to retransmit in case of an error. Also if too many collisions are happening then the network slows and you need to look at segmenting your network better.

HTH

by estebandelatorre

It's a low level protocol
CSMA/CD means Carrier Sense Multiple Access Collision Detect. It is the method that Ethernet incorporates to move information around the network.
The nic card firts sense the cable, if it is free of traffic, (collision detect) it start sending packets to the network
If NOT, (multiple access) it will set an internal timer to a random value depending on the network congestion, and wait for that time to sense again. This allows others to trasmitt. Each time the sense returns an "occupied cable" the timer increase it base value, causing long delays

This discussion is closed to new replies.