6 replies
by ac-8700 Accepted solution
by mne Accepted solution
in the service and maintenance guide on page 1-4, it says in order to reset the password you will need to dismantle the laptop, remove the real-time clock (rtc) battery for approx. 5 mins, replace it and the password will be gone. also all settings in the cmos will be reset to the factory defaults.
by ac-8700 Accepted solution
by sermes22 Accepted solution
I have the same problem with my NC 6230 Laptop.
Please help me.
by ac-8700 Accepted solution
And i dosent work...
So i total clueless and thinking about trowing that piece of shit out
by jamesatmaisonverre Accepted solution
1. Prepare the notebook for disassembly (refer to Section
?5.3 Preparing the Notebook for Disassembly? for more
information).
2. Remove the real time clock (RTC) battery (refer to Section
?5.20 RTC Battery?).
3. Wait approximately five minutes.
4. Replace the RTC battery and reassemble the notebook.
5. Connect AC power to the notebook. Do not reinsert any
battery packs at this time.
6. Turn on the notebook.
All passwords and all CMOS settings have been cleared.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending