Question Locked

I have an issue in WOL from my access point.

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Please refer below image link. ​https://ibb.co/wQsX9JQ​​​

PC1 is perfectly working the WOL function on main router GT-AX11000 but PC2 is not working WOL from AP RT-AC68U. When I connected PC2 to main router GT-AX11000 directly its worked perfectly. How the magic packets cab send to the AP from main router on the existing setup. Please support.

Note:- WOL is initiating from main router ASUS GT-AX11000 bcs the access point is working under mesh configuration.

AP Configuration:- ​https://ibb.co/PZwCHkg

4 replies

by samsulariframdhani

@kees_b

WOL doesn’t work via WiFi, only via Ethernet. Try a WiFi to Ethernet-adapter. See https://www.elevenforum.com/t/how-to-perform-wake-on-lan-over-wifi-solution.14041/ https://www-tubidy.ws for example.

-------------------------------------------------------

Thanks for the clarification! That explains a lot, I’ll definitely look into using a WiFi to Ethernet adapter as you suggested. Appreciate the helpful link too..

by wemil17279

I have binded the MAC address of the computer in the router's ARP table and also set a static IP for it in the DHCP listing. I have forwarded port 9. I have changed the BIOS settings to allow wake on LAN from S5 state and have changed the appropriate Windows 10 settings about the network card too.

by bencutting164 edited

I am facing same issues with WOL not working through an access point while it works fine when directly connected to the main router. It looks like the magic packet isn’t being passed correctly in mesh mode. I checked a site that explains different router/AP configurations for Wake-on-LAN and it really helped me troubleshoot. Might be useful for your setup as well.

This discussion is closed to new replies.