Discussion Locked

i have to design a new network

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i 've to design a network which is in two buildings which are 1 km apart. so how to connect those networks. which cable to use. which device to use. can't use wirless lan.
thanks

5 replies

by tbradley

I kilometer apart, you will need to run
multimode fiber optic cable between the
two building. Multimode is the "cheapest" when it comes to connecting the fiber strands to your exisiting network(s), which I assume are Ethernet. It's good for a distance of
3000 meters at 10mps, or 1000 meters at
100mps, tho these numbers may vary depending
on the equipment you use to connect.

Basically, you will need a 10mps media converter, Fiber ST to 10baseT ( RJ45 ) at each end. These come with MDI/MDIX settings, so they can plug into just about anywhere in your hub/switch mix.

This discussion is closed to new replies.