Question Locked

I need Dell Optiplex GX 280 CPU temperature monitoring software

0 helpful
17 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have tried "EVEREST Home Edition"CPU Thermometer" Hmonitor; etc on Dell Optiplex GX 280.
but non of them are showing the CPU temperature and fan speeds.
what software should i use for this this particular system.

17 replies

by gforce007

thanx for your reply.
but that software has also not worked.
it is only showing the HDD temp.
No CPU temp
No CPU FAN RPM
No Chasis FAN RPM
one thing more i am using Windows 7, may be thats the reason.
i have not tried it on other windows.

by older mycroft

There isn't one single entry that does not contain a current (and regularly updated) value.

It might be your motherboard sensors at fault - it's not Windows 7.

by gforce007

i don't think it can be a windows 7 issue, since all the older programs that i had are running fine. but only hardware monitoring programs don't show CPU temperatures.
Any way the program you mentioned seemed to be a very nice tool.
thanx for sharing that good tool, though it didn't showed my CPU temp and FAN related informations.

by rob miners

to check out the BIOS temp readings every now and then. I've used a few different programs and they haven't even been close. Tested them on a couple of Systems as well.

Edit: revised

by gforce007

which 2 programs, plz did you tried them on Dell optiplex systems

by skdtech

If none of these are working then you might want to check into how the BIOS is setup

by gforce007

I downloaded and tried, though your program is amazingly perfect.
but no temp for me.
i guess my mobo sensors have problems.......

by skdtech

If I recall correctly some BIOSes need to be setup for sensing programs to read the data

by rob miners

has gone to silicon heaven. No I was using Gigabyte motherboards.

I checked the BIOS temp as a reference after they had been running for awhile.

XP speedfan 10c below the Bios reading

XP SIW 10c below the Bios reading

W7 speedfan spot on

W7 SIW 15c below the Bios reading

W7 EasyTune 5 18c below the Bios reading

W7 Hardware Monitor 20c below the Bios reading

by oh smeg

It is more likely that the M'Board doesn't comply with 7 Or Vista. I've seen quite a few bits of Hardware that just don't work well with either of those OS's. ;)

Col

by gforce007

My PC camed with pre loaded Windows 7 and i haven't tried other OSes for testing the temp control. i guess i have to install Xp for these and test the temp control again.

by oh smeg

To make sure that is correctly configured? Some allow you to Disable Temp and Fan Speeds. ;)

Col

by gforce007

Well friend as u might know Dell systems don't show much info in their BIOS program.
Most stuffs are auto adjusted in branded systems I,e Fan speed, Temp control, Overclocking, Bus speed, and stuffs like those.
There is nothing in its' BIOS which says some thing about temperature monitoring or sensors.

This discussion is closed to new replies.