Discussion Locked

I/O Subsystem Driver Failed

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I'm running Windows 95 on a Compaq Laptop and every time I try and start my computer it give me the following error:
"While initializing the device IOS:
Error: An I/O subsystem driver failed to load.
Either a file in the .\iosubsys subdirectory is corrupt, or the system is low on memory."

I already checked the mem and it's fine, so how to I get this fixed?

7 replies

by mphoffar

I would first boot into safe mode and disable things like the uSB controller. Normally, I would also look at updating a busmastering and IDE controller, but latops generally don't have anything real special to cause these kind of errors. After that, unfortunately, the best way to fix this is by reinstalling windows. You shouldn't have to reformat just install on top of what you have. The part with the directory you're referring to is that there's so many dependencies in there, that you'd make yourself crazy trying to find them all.

Good luck to you

Mark

by Former member

Have you changed anything recently? (new software/hardware/power surges/crashes) Does the system start after this error is displayed or does the computer stop booting?

by hamworthy

This is a fairly rare problem with Win95 although it has been fixed in Win98. Microsoft's technical paper Q225497 gives a full description of the problem, but to fix it do the following.

1. Open the system.ini file in the Windows directory

2. Scroll down until you find the line [vcache]

3. Add 'maxfilecache=6144' below it so you have the following

[vcache]
maxfilecache=6144

4. Save the system.ini and reboot

All should be working. You will have to boot in safe mode or DOS modeto edit the system.ini file.

This discussion is closed to new replies.