3 replies
by thechas
Your "standard" IDE controller is part of the chip-set on the motherboard.
The chip-set is the 2 large integrated circuits mounted on the motherboard.
Intel, AMD, SiS, ALi, and Via are common chip-set manufactures.
If you have an axillary IDE controller giving y 4 different IDE connectors, that is usually a clearly marked small IC on the motherboard.
High Point and Promise are common IDE controller chips used for axillary controllers.
I suspect that your problem is NOT the IDE driver.
You either have a drive jumper setup error,
A bad hard drive,
Or a drive that was set up using a BIOS overlay program.
Another possibility is that you have a hard drive that is too large for either the motherboard or the version of Windows you are running.
Chas
by quatrain
Poster rated this answer.
spot on Chas,i needed to jumper alll drives,for it to work,.thank you
by quatrain
This discussion is closed to new replies.
Trending Software posts
Sort by Trending