Discussion Locked

IE cause page fault in Kernel32.dll

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Various Hardware Platforms and different OS Platforms, Win95, Win98, W2Kw/SP1. IE versions 4.01, 5.01sp1, 5.5. Issue: "IEXPLORER cause an invalid page fault in module KERNEL32.dll at 0137:bff85807". This is happening on 3 different machines, butis not affecting others of like or similar configurations. More detail can be provided, please advise as to the corrective fix actions...I will up the points if the suggestion works flawlessly for all three...

7 replies

by duwaned

Have you had a look at Technet article: Q155116 ? This article describes the same fault, and gives some ways to troubleshoot the problem.

Even though the versions of Explorer and Windows reffered to here are different to what you have, the info is normally still relevant (I have found this from previous experience!). Try the steps detailed in the article and let me know if they helped.

To get hold of this article number, go to www.microsoft.com, and do a search for the article number listed above.

I hope this info helps you in your quest!
Regards.
Duwane

by duwaned

Also, is there anything that the 3 machines have in common (i.e. the same display card, or motherboard, etc)??

by teknik

You should try to change the RAM's of these machines.This problem is usually held about RAM problems.If it doesn't work try to change RAS-CAS delay times of RAMs in BIOS.This is not an program or OS error.It maybe because of modem or ethernet drivertoo(if they are using).One more thing to check out is virus.I'm sure you have checked that if they have trojan or a virus??
Good luck

This discussion is closed to new replies.