Discussion Locked

if you don't have your windows 98 cd...

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i am installing an ethernet card into an old pc (to run on the home network). popped the driver disk in, began installing, then asked for my window install cd. can not find it (i've looked everywhere...). is there anyway around this? thanks for the help. scott

6 replies

by curacao_dejavu

try to search for *.cab on your pc.
if you had copied the win98 folder on the harddisk you might find them. and point the setup to that folder.

else try
c:\windows
c:\windows\inf
c:\windows\drivers
a:\ (assuming drivers disk)
c:\windows\cab

else "borrow" a cd

Leopold

by devinefv

The Ethernet installation prompts for specific system files to complete the NIC installation..Try Specifying the location: "C:/windows\options/cabs"..Try specify where ever you placed the driver for your card.... It may be looking for a file that ends with INF [an inititiation file]...

D.Q.

by willcomp

Win98 needs network files (not NIC driver) to complete NIC installation. Advice to search for cab files is good. Many OEM vendors place needed cab files on hard disk.

If those files are not on your hard disk, you will need a Win98 CD. See is you can borrow one or check with a local PC repair shop and see if they will copy cab files to a CD for you.

Dalton

by melvin_780702

Or you may just want to list the files windows is requiring you for the ethernet setup...Find a machine with similar OS, copy the listed files on a disk

by padum

U much hv to provide win98se disk for completing the installation of driver.Win98se cd itself hv some files for network adaptor so manufactures do not sometime provide the files at their installation disk.
thanks

by wlbowers

Windows 98 was a continuing lesson in Microsoft's ability to piss-off technicians and individuals.

Win98 wounld not look to see if anything had been installed that was associated with the hardware.

It reinstalls everything that's remotely associated with the item.

Without the cd you can direct it to directories that have been listed in another thread, and it will find most if not all of the files you need.

Of course it will be copying the files back onto itself. I have hosed up computers trying to do this.

If you can find a cd it would be in your best interest. Of course there were 4 different flavors of win98.

If you have room on your hard drive you can create a folder and copy the contents of those directories into it. Then direct the install to there.

Good Luck

Lee

This discussion is closed to new replies.