Question Locked

iis rights to users

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all.
I have Windows 2003 Server who work like Domain Controller.
On a DC I use IIS 6.0 because I have internal web site. This Web
site must access from domain users via internal network and therefore
I set on IIS option "Integrated Windows authentication" for better Security.
Actually problem is that when on Workstations is Logon like a
Domain User, IIS Return error: HTTP Error 401.1 - Unauthorized.
If I Logon like a Domain Admin I have permission and web site work
perfect.
users didn't get any details under iis in computer manage except website folder but the folder is empty.at same time in same computer if i log on as a admin these all things are working perfect

Thanks for help in advance.

3 replies

by triathlete1981

Is the internal web site something like SharePoint? if that's the case, you need to go into Sharepoint and set up permissions within Sharepoint to allow access to the site. Most other intranet programs require permissions to be set within their own programs, even outside the scope of IIS.

by Former member

You receive an "HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials" error message when you try to access a Web site that is part of an IIS 6.0 application pool

SYMPTOMS
When you try to access a Microsoft Internet Information Services (IIS) 6.0 Web site that is configured to use Integrated Windows authentication only, you are prompted for your user credentials. When you try to log on, you receive the logon prompt again. After you try to log on three times, you receive the following error message:
HTTP Error 401.1 - Unauthorized: Access is denied due to invalid credentials.

CAUSE
This behavior may occur if the following conditions are true:
?
The IIS 6.0 Web site is part of an IIS application pool.
?
The application pool is running under a local account or under a domain user account.
?
The Web site is configured to use Integrated Windows authentication only.
In this scenario, when Integrated Windows authentication tries to use Kerberos, Kerberos authentication may not work. To use Kerberos authentication, a service must register its service principal name (SPN) under the account in the Active Directory directory service that the service is running under. By default, Active Directory registers the network basic input/output system (NetBIOS) computer name. Active Directory also permits the Network Service or the Local System account to use Kerberos.

RESOLUTION
If this behavior occurs when the application pool is running under a local account, follow the steps in the "Workaround" section.

To resolve this behavior when the application pool is running under a domain user account, set up an HTTP SPN with the NetBIOS name and the fully qualified domain name (FQDN) of the domain user account that the application pool is running under. To do this, follow these steps on a domain controller:

Important An SPN for a service can only be associated with one account. Therefore, if you use this suggested resolution, any other application pool that is running under a different domain user account cannot be used with Integrated Windows authentication only.
1.
Install the Setspn.exe tool. To obtain the Microsoft Windows 2000 version of the tool, visit the following Microsoft Web site:
http://www.microsoft.com/downloads/details.aspx?FamilyID=5fd831fd-ab77-46a3-9cfe-ff01d29e5c46&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=5fd831fd-ab77-46a3-9cfe-ff01d29e5c46&displaylang=en)
The Microsoft Windows Server 2003 version of the Setspn.exe command-line tool is available in the Windows Server 2003 Support Tools that are included on your Windows Server 2003 CD. To install the tools, double-click the Suptools.msi file in the Support/Tools folder.
2.
Start a command prompt, and then change to the directory where you installed Setspn.exe.
3.
At the command prompt, type the following commands. Press ENTER after each command:
setspn.exe -a http/IIS_computer's_NetBIOS_name DomainName\UserName

setspn.exe -a http/IIS_computer's_FQDN DomainName\UserName
Note UserName is the user account that the application pool is running under.
After you set the SPN for the HTTP service to the domain user account that the application pool is running under, you can successfully connect to the Web site without being prompted for your user credentials.

WORKAROUND
To work around this behavior if you have multiple application pools that run under different domain user accounts, you must force IIS to use NTLM as your authentication mechanism if you want to use Integrated Windows authentication only. To do this, follow these steps on the server that is running IIS:
1.
Start a command prompt.
2.
Locate and then change to the directory that contains the Adsutil.vbs file. By default, this directory is C:\Inetpub\Adminscripts.
3.
Type the following command, and then press ENTER:
cscript adsutil.vbs set w3svc/NTAuthenticationProviders "NTLM"
4.
To verify that the NtAuthenticationProviders metabase property is set to NTLM, type the following command, and then press ENTER:
cscript adsutil.vbs get w3svc/NTAuthenticationProviders
The following text should be returned:
NTAuthenticationProviders : (STRING) "NTLM"
STATUS
This behavior is by design.

MORE INFORMATION
If you set the SPN by using only the FQDN of the server that is running IIS, you will be prompted for your user credentials after 30 minutes. The 30-minute time-out occurs because of the way that Internet Explorer caches Domain Name System (DNS) information. After 30 minutes, Internet Explorer reverts to the NetBIOS name. Therefore, you must make sure that you also register the SPN by using the NetBIOS name of the server that is running IIS to avoid being prompted for your user credentials. For more information, click the following article number to view the article in the Microsoft Knowledge Base:
263558 (http://support.microsoft.com/kb/263558/) How Internet Explorer uses the cache for DNS host entries
To verify the registered SPNs for the user account that your application pool is running under, start a command prompt, type the following command from the directory where Setspn.exe is installed, and then press ENTER:
setspn.exe -l UserName
A list of the registered SPNs for the user account is returned.
Internet Information Services (IIS) 7.0
The topics discussed in this article can also apply to IIS 7.0 if one of the following conditions is true:
?
Kernel Mode Authentication is disabled.
?
Kernel Mode Authentication is enabled, and the useAppPoolCredentials attribute is set to TRUE.

REFERENCES
For additional information about using Integrated Windows authentication with IIS application pools, visit the "Worker Process Identity Restrictions with Kerberos" section of the following Microsoft Web site:
http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/523ae943-5e6a-4200-9103-9808baa00157.mspx (http://www.microsoft.com/technet/prodtechnol/WindowsServer2003/Library/IIS/523ae943-5e6a-4200-9103-9808baa00157.mspx)
For additional information about authentication failures or access control failures in IIS, you can download Authentication and Access Control Diagnostics 1.0. The following file is available for download from the Microsoft Download Center:
http://www.microsoft.com/downloads/details.aspx?FamilyId=E90FE777-4A21-4066-BD22-B931F7572E9A&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyId=E90FE777-4A21-4066-BD22-B931F7572E9A&displaylang=en)
Note The AuthDiag tool is designed to help you when you see either of the following error messages:
?
401.1 logon failed
?
401.3 ACL
The AuthDiag tool can also help you when you experience Kerberos problems.

APPLIES TO
?
Microsoft Internet Information Services 6.0
?
Microsoft Internet Information Services 7.0
http://support.microsoft.com/kb/871179

Please post back if you have any more problems or questions.

This discussion is closed to new replies.