Question Locked

I'm going to start making a home wireless network, need help

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi there, I need help starting a home wireless network, and also integrating it with an existing wired network.

Wired network: 3 Desktop pcs networked and internet sharing via a Linksys Cable/DSL Router Model no. BEFSR41. The wired network is on the 1st floor of the house.

I have acquired two Vista laptops that have built in 802.11g devices in them.

Ideally, I'd want the laptops to be able to wirelessly connect to the network, whether they be on the 1st or 2nd floor of the house.

I visited the linksys website a while ago,read a couple descriptions regarding wireless products, and I think this is the one I need:

Wireless-G Broadband Router with SpeedBooster
The Wireless-G Networking Solution with SpeedBooster Performance Enhancement

http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayout&cid=1133202177241&pagename=Linksys%2FCommon%2FVisitorWrapper&lid=7724136001B02

But with so many wireless products out there, it's really hard to tell which one will suit my requirements, and I wouldn't want to pay extra cash for the unneccesary features

thanks in advance

4 replies

by pser

Wireless router you decide to go with, just be sure and read the documentation especially in regards to security. If not configured properly a wireless network can be "hijacked" which will compromise your entire network.

I don't have time to do the research but will leave you with this ... think SECURITY, ask about SECURITY, research ... SECURITY.

When you decide on your make and model and if you run in to problems securing your network, come on back and I am sure you will get the best advise on the WWW!

Luck to ya!

by hal 9000

Waste of money to me as you'll need to cripple most of the Routers functions to allow the wired computers to communicate with the WiFi computers.

By adding another Router you will be creating a Child network that can communicate quite well within it's self but will fail to connect to the Wired computers. Great Idea if you want a Child Domain or something similar but here you only need a WiFi Access Point not a WiFi Router.

Other than that do exactly what the above poster said think, breath and live [b]Security![/b] As if you don't the best thing that can happen is that you get hijacked and your Internet connection is stolen by someone unknown the worst thing that can happen is that some Kiddy porn gets downloaded through your open WiFi Access point and you end up as a [b]Registered Sex Offender[/b] because you are responsible for your Internet connection and what is actually downloaded through it. I suppose you could also end up being a [b]Registered Terrorist[/b] as well if something equally nasty but of a Terrorist type gets downloaded. After all you wouldn't want to be responsible for allowing someone to download details on how to make a [b]Dirty Bomb[/b] with common easily obtainable components would you?

Col

by bogdan.botezatu

I won't question your need for wireless. I will just limit to answering your question. The optimal performance is reached when you use one or two access points distributed on the first floor and on the second, respectively. I would recommend you such a device I am very pleased with: Cisco Aironet 1240AG: http://cisco.com/en/US/products/ps6521/index.html

The configuration is your business exclusively, but think again if it's worth investing $$ in two routers for just two wireless devices. Whoops, I did it... I questioned your need for wireless.

edit: corrected some typos

This discussion is closed to new replies.