Discussion Locked

Implementing WLC for wireless connections

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I was tasked not too long ago to figure out how WLC work and try to figure out how to implement it in our business. So far i did figure out that it needs LWAP not just AP for it to work. Which means i need to converte all our AP to LWAP (Which there is alot of them, more than 100). im not sure though i have a solid understanding about how WLC works and what would a basic configuration i need for it to work.
Im going to be using a Switch (3750) connected to the WLC (cisco 4402) which is connected to the LWAP's.

P.S i know a 4402 can only support 50 LWAPS, price is no issue i can buy 4404's as needed.

2 replies

by sirkozz

create a script for converting AP's to lwap's
cisco reccomends only 5 @a time
configuration of a 4400 airspace controller
is a snap, its kinda of a switch with some router-like functionallity. just remember to document the channel and power levels of all the AP's so that you can input them into the controller. you might want to invest in a redundant controller also.
100+ Ap's lotta work

by james.saarikko

if money is no object and you have 100s of APs..you may want to look at the WiSM Blades for 6509E chassis.

If you need help or would like any amplifying info...please let me know.

This discussion is closed to new replies.