Discussion Locked

incorrect subnet mask

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We recently moved from one lan system to another. On the previous lan we used subnet mask 255.0.0.0 and on the current system we use 255.255.0.0. The current system is using win 2k server. Ever since the cutover we have had a problem with some of our win98 PC that for some reason get the old subnet mask (255.0.0.0) in the IP Config and subsequently they can't log in until we do a winipcfg and the subnet mask is correctly change back to 255.255.0.0 However it can reocurr on the same PC later.

12 replies

by quintar51

Check the scope option in your DHCP server/s.

It might be possible that the win98 clients are getting that old subnet mask as part of the scope options in the DHCP server/s.

by kninamango

How does your PC?s are getting the address? One by one manually or by DHCP?
If it is by DHCP check your server config. If it is done manually check that th PC?s are not configured to obtain the addresses by DHCP.
If the config is manual they should not change their address by themself.

by mswit10296

How does that PC get it’s IP address? Look at the DHCP server’s configuration. Do you have a “vendor” class specified? Go over the DHCP configuration in ALL servers providing addresses. Do you have a rouge server handing out addresses? You said "moved to another LAN" do you mean different subnet or a totally different LAN? Are you running ??? NT. W2K, UNIX. If you are running W2K are you also running AD? If so make sure only authorized folks hand out addresses. Just a couple of thoughts

mike

by lamvidao

PCs are still picking up old subnet mask because it is picking a DHCP IP, DHCP server's setting may be pointing to old subnet mask. To avoid PC picking up old subnet, you can change DHCP server settings (difficult) or to be simple, you can create more internal IPs and assign IP to each PC. Also, go to Network Configuration and put new subnet mask 255.255.0.0 there so PC will store the new IP without picking up the old one.

by noufal

do u have dhcp server localy.if not check the dhcp helper address at router configuration.

If the client can not renew the ip address; the ip address will be 169.X.X.X. with sub netmask 255.255.0.0 .check the dhcp server address when u get this problem.is it 255.255.255.255
pls relay

This discussion is closed to new replies.