If the computer is booting to a POST Screen you just need to open the BIOS and set the correct values.
Things like Data & Time are the more common but you should also check to see if the system is correctly identifying the CPU and installed Memory then save the changes as you exit the BIOS.
If however you attempted to Flash the BIOS with the wrong Package and the system is no longer booting to a POST Screen/Gateway Logo then those who told you [b]Tough Luck[/b] are completely correct though a bit short on sympathy.
If the BIOS EPROM has been erased or incorrectly loaded and the system is no longer POSTing there is nothing you can do short of changing the BIOS Chip in this unit.
You can buy replacement BIOS Chips from several sources but I have only ever used BIOS Man here
http://www.biosman.com/
I have had excellent service from them in the past and whenever I need to Flash the BIOS in a Server I always buy a new Chip and replace the Integrated Circuit. It's far less problematic doing things that way.
You do however need to know what you are doing and may require a special IC Extractor. ;)
Col