Networks

Ask something
Discussion Locked

Increasing Drive Space Netware 6 server

0 helpful
3 replies

by mablair88 1 view

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I want to replace two 36 GB HD's in a compaq server with RAID 0 (disk mirroring configuration) with two 72 GB HD's. In my test environment I was able to replace the two 36 GB HD's with two 72 GB HD's without any issues however Netware does not see the additional drive space. Can anyone recommend a software solution? An older version of Server Magic did not see the additional either. I want to keep this process as simple as possible. Thanks!

3 replies

by pierrejamme

You didn't specify your hardware so it's hard to recommend anything.

As a guess I would try breaking the mirror. Haven't used mirrors in many years.

When I replace or add hard drive to my Raid 5 controllers they always keep the smallest size in the container. so I have to create a new container or blow away the old one and reconfigure. Adpatec controllers us A on startup to get into the SCSI management.

This discussion is closed to new replies.