Discussion Locked

Install Modem and Sound Card

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an Unbranded Internel modem and a soundcard and I don't have the device drivers for both and name of both the cards are not on it, is there any way to install these two cards in my Win 95 system?

Thanks

9 replies

by darryn_marr

For the modem, win95 has a generic modem driver on the win95 cd that you can use, simply remove the modem from the system panel in the control panel, then restart. when it detects the modem, it should brring up a box asking you if you have the drivers for the modem (have disk). Innsert the win95 cd and select Generic modem, and the speed. As for the sound card, most sound cards are soundblaster compatible, so you might want to try a creative labs sb16 sound driver, which you can also find onthe win95cd

by Former member

if you really want to know what kind of expansion cards you have, there is an FCC ID number printed on every circuit board that can be searched on the FCC website. it really is a perty cool feature cause the feds licensing of electronics requires an extensive information expose on the device and the manufacturer etc. the url is www.fcc.com. what could be more simple.

schmegly in seattle

by Former member

sorry wrong url try this:

http:/www.fcc.gov/oet/fccid/

by lathe

It didn't help me in this case, I can't even find a FCC no. on it, but I found it is a very good way of locating the product name, thanks very much.

by travkinlaw

www.driverguide.com: they have the fcc link and several driver locating services. Also for modems,the generic Win drivers will probably work,but also sometimes you can use the chipset manuf to locate the type of modem to get the drivers.Use this same website for sound.Crystal makes drivers that are compatible with alot of sound cards-except Yamaha

This discussion is closed to new replies.