Discussion Locked

Installation of Antivirus

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

OK here's the question, I was recently installing Mcafee Antivirus on some workstations, when one of the workstations decieded to give me a blue screen of death. Since then I can not load the newer version of Virus Scan on this particular w/s.
What I've done so far
Deleted all files that were linked to Mcafee
Deleted any register files that contained Mcafee or Network Associates
Updated Windows 98 with all criticle updates
Installed IE5.5
reinstalled MS Installer
Checked out technet andcould not find anything that could help me.
Hopefully someone here has ran accross this before. Please note that this is Mcafee Vscan 4.03 converting to 4.5.

Thanks for your help

8 replies

by jb007

You might consider running a regclean and then going into the registry and removing all references to symantec and NAV (only if you don't have any other symantec products as they share registry keys and files).

Otherwise if you do have other symantec products you may have to remove then and the liveupdate component then re-install all your software.

regards,

jb

by crisanderson

Thanks JB, but that did not resolve my issue. I am receiving the message Fatal Exception OE in 0028:C00067f0 in VXD VMM (01) + 000057f0

by gabacious

What were the details of the blue screen? Are you still getting blue screens? And, what happens when you try to load McAfee again? Is it BSODing on the install?

Are you certain that you no longer have references to McAfee in autoexec.bat and the run and run services area of the registry (HKLM\Software\Microsoft\Windows\Current Version\Run)?

by crisanderson

Thanks Gabacious, but that did not resolve my issue. I am receiving the message Fatal Exception OE in 0028:C00067f0 in VXD VMM (01) + 000057f0

I know this is a vxd in Virutal Memory

by skutts

The error message you report in your comments looks like a video card issue - this error# is usually associated with TNT video cards - the latest drivers should cure this (if not, go into your BIOS and set the AGP apeture size to 8Mb)

this is assuming of course that you have a TNT video card! - a very similar error# has also been reported with certain cards running the nVidia chipset - anyway, regardless of the video card you have, due to the similarity of the error messages that relate to video cards, I think your next course of action should be to update your video driver, and failing that, change the agp aperture size, and failing that turn the hardware acceleration down under system properties

hope i helped

Rog

by crisanderson

Thanks to all that tried to help me on this, however none of the above helped... basically I just ended up staging another machine, as it was quicker. But Thanks to all that tried to help!

This discussion is closed to new replies.