Discussion Locked

Installation of Windows NT Server 4.0

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a problem in installing the Windows NT 4.0 Server for a multiboot configuration with my Windows NT 4.0 Workstation. Previously I have successfully installed and re-installed the Windows NT 4.0 Server which I used for my training on these operating systems. In addition, I was also able to install the Windows 2000 Professional RC2 and the Windows 2000 Advanced Server RC2.

The hard drive partitions were as follows:
C: Windows NT 4.0 Workstation
D: Windows NT 4.0 Server
E: Windows 2000Professional RC2
F: Windows 2000 Advanced Server RC2

All the four operating systems were operational. But when the Windows NT 4.0 Server is about to expire (this is a 120 day evaluation copy), I made a mistake of re-installing the Windows NT 4.0Server from the disk using (booting up with) the NT 4.0 Server in the D drive .( Previously, what I did was to boot on the NT 4.0 Workstation and deleted the contents of the D drive and the pagefile.sys and then install the NT Server 4.0 on the D drive. This is the same procedure which I did when I installed the Windows 2000 Professional RC2 on the E drive and the Windows 2000 Advanced Server RC2 of the F drive.)

The Windows 2000 OS were also deleted with only the Windows NT 4.0 Workstation OS.

The boot.ini file is shown below:
[Boot loader]

Timeout = 5
Default = C: \$WIN_NT$.~BT\BOOTSECT.DAT
[Operating Systems]
multi(0)disk(0)rdisk(0)partition(1) \WINNT=?Windows NT Workstation Version 4.00?
multi(0)disk(0)rdisk(0)partition(1) \WINNT=?Windows NT Workstation Version 4.00 [VGA model]? /basevideo /sos

C: \$WIN_NT$.~BT\BOOTSECT.DAT=?Windows NT 4.00 Server Installation /Upgrade?

There could be other files that were affected and I don?t know how to make the necessary correction. I would appreciate any help or comments in solving this problem so I could reinstall the Windows NT Server 4.0.

7 replies

by ronnonf

First can you boot to the workstation if the answer is yes then modify your boot.ini file and remove the Server entries. Make the line from Workstation the default. Meaning from multi - = (don't include the equals). Restart the install using winnt32.exe .
If you cannot boot to NT at all then I would advise creating a directory called safe and moving the NT files files fromt he root to that directory (NTDETECT, NTLDR and BOOT.ini). Run the Emergency repair to repair the env. feature using the NT boot diskettes.
After you are able to re-boot into Wrk then start the re-install of NT Server.

by a.c.simplina

Thanks for the advise but it did not help. So I just installed the Windows 2000 Pro and Windows 2000 Server (eval copy)which I am using now for training.

I hope I could give your partial points for the effort. But thanks anyway.

My apologies for the delayed response.

by konopko_przemyslaw

How to install winnt server

1 make Backup of yours files
2 create bootable DOS floppy
3 reebot your computer with the DOS foppy
4 under DOS create a entry, where you want windows nt srv to be.
5 still under Dos type for exemple c:\programs\winnt.exe /b (for no floppys install option)
6 win nt server then will ask you few questions .....
and you there

by a.c.simplina

Thanks but it did not help. What I want to do is to regain my multiboot configurations: Windows NT Workstation 4.0, Windows NT Server 4.0, Windows 2000 Professional and Windows 2000 Server.

I just installed the Windows 2000 Professional and Windows 2000 Server (eval copy) for my training. But thanks anyway.

My apologies for the delayed response.

by konopko_przemyslaw

How to install winnt server

1 make Backup of yours files
2 create bootable DOS floppy
3 reebot your computer with the DOS foppy
4 under DOS create a entry, where you want windows nt srv to be.
5 still under Dos type for exemple c:\programs\winnt.exe /b (for no floppys install option)
6 win nt server then will ask you few questions .....
and you there

This discussion is closed to new replies.