ok...
physically setup the printer, unbox, plug it in, make sure it's near to a network port, etc...,
now... obtain a static IP for the printer, usually you'd reserve a part of your range for this process... If you're not sure, view the IP's of your other printers (on the file & print server go to properties of any printer, review the port settings, all ports for all printers will be shown).
Enter the static ip, subnet mask and if needed default gateway into the the printer via the front panel (you'll have to navigate the menu to find the correct place to do this, but usually found under a menu such as Network - tcp/ip - etc.,
once you've done this, go to a network PC and ensure you can successfully ping the printer.
On the file and print server, add a new printer, managed by this computer, create a standard tcp/ip port and enter the ip address as entered on the new printer.
Accept the default to publish the printer in AD, also enter an appropriate sharename for the printer, as well as putting in a description (1st floor sales printer, for example)... print a test page at the end... and ensure this comes out on the printer...
go back into printer properties and configure the settings such as A4 Plain as the paper type, default tray options, etc...
Then instruct the users to go to Start - Search - Printers... - Printer on the network... from the resulting Find Printers window click Find Now... all the printers on your network should be displayed (providing that they're all published in AD) The users can then just double-click the printer they want to use! (as long as there are no restrictive permissions)
That's it in a (sort of) nutshell!