Discussion Locked

installing netware 4.11

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i am trying to install netware 4.11 and it keeps hanging.

when we install it ask which langage to use. soon as we choose english it hangs??

we have got all the right drivers, enough ram, hard drive space, etc.

12 replies

by bdgray

If you are using an AGP video card try using a cheap old PCI ATI or S3 video card.

by paco454

You should have only Dos 6.x or higher(not Win9x)installed and CDrom drivers configured correctly in cofig.sys and autoexec.bat. Not from a Boot disk.

by mike.taylor7

Check your Config.sys & Autoexec.bat to ensure that no memory drivers are running. I.E. himem.sys, ramdrive, emm386 etc...

Also put the following lines in config.sys:

Buffers=40
Files=30

Hope this helps

Mike

by gaplid

First don't use windows 95/98 operating system , cause it doesn't work well with Netware, and in config sys file thereare to lines files=30 buffers=30,

by papachuck

The Licence diskette has a OS on it... Boot from that and fdisk-format your dos partition with the Licence disk....Besides the settings above you will need CD software to configure the dos drivers for the CD Rom..Also the MSCDEX.exe from a win95 disk will work with the old version of DOS....Good Luck....Chuck

by selonboy

Do you format your C Drive with Win 95?
If yes, you should re-format it using MS-DOS ver 5 or later.
If not, try to change your CD ROM driver with general driver like OAKCD.sys.

Good Luck

This discussion is closed to new replies.