Discussion Locked

Installing wu-ftpd-2.6.1-20.i386.rpm

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I seem to be having a problem installing this rpm. It is on Red Hat 7.2. I issue the command:

rpm -Fvh wu-ftpd-2.6.1-20.i386.rpm

and about a second later it give me back the prompt, without doing anything. I tried using the graphical version of rpm, and got a message saying that the 'packageDepCheck()' failed. I assume this means I don't have the required dependency. I am not sure how to find out which packages that it needs, which I don't have.

I tried to download the binary filefor the wu-ftp server and install it this way, but I again ran into problems...maybe a dependency thing??

Any information would help. Thank a lot.

14 replies

by cp409sd

Forgot to mention that I am trying to install it for the first time. There has never been an older version installed on this system

by skizz

-F is the freshen option, so the install won't take place.
I'd normally just use rpm --install wu-ftpd-2.6.1.20.i386.rpm

by patrick

Hi,

I have allso come across this broblem and found that rmp sometimes looks for the source code of the package that you are trying to install. It could be an error in the package itself... of that I'm not sure of yet. All you have to do to install it is to let rmp ignore the dependency check. You can do that in both the GUI and the console part of rpm. The software will work after you install it.

Patrick Murphy

by lintadsl

rpm -Uvh wu-ftpd-2.6.1-20.i386.rpm will give you a list of dependency that you need to install.
The best way to use Linux is that install all dependency before do force installation. No matter how many dependency you need to install, you can find them from www.rpmfind.net

Good Luck,

by cp409sd

I don't get it...here are the commands and responces I have tried, and they give me conflicting results:rpm -Uvh wu-ftpd-2.6.1-20.i386.rpm
Preparing... ########################################### [100%]
package wu-ftpd-2.6.1-20 is already installed

rpm --install wu-ftpd-2.6.1-20.i386.rpm
package wu-ftpd-2.6.1-20 is already installed

rpm --install --nodeps wu-ftpd-2.6.1-20.i386.rpm
package wu-ftpd-2.6.1-20 is already installed

rpm -V wu-ftpd-2.6.1-20.i386.rpm
packagewu-ftpd-2.6.1-20.i386.rpm is not installed

rpm -e wu-ftpd-2.6.1-20.i386.rpm
error: package wu-ftpd-2.6.1-20.i386.rpm is not installed

The order I execute these does not seem to matter...their results for each command are the same. Thanks for your help.

by patrick

It seems to me like the software is already installed. The best way to check if this package is installed is to use the rpm pakage manager in X and check if the package exist and what version is installed. You can also check the version of the ftp server on your system by running this command: "in.ftpd --version".... this will tel you what versoin is installed. If you feel that the software is not fully installed and you can find it in package manager unistall it by using the GUI and then install it again. You can also test the ftp server before uninstalling it by enabling it in your services. To start it just type "service xinetd restart" and then try to ftp to your localhost. I hope this helps :)

Patrick

by lintadsl

I see, It seems like you have wu-ftpd-2.6.1-20.i386.rpm. The best way to make sure is type
rpm -qi wuftpd
This will give you an idea whether you have it or not. Now, you might need to enable wu-ftp from
/etc/sysconfig/wuftpd. open the wuftpd file and make sure it says;
disable = no
Then restart xinetd (/etc/rc.d/init.d/xinetd restart)

Good Luck,

This discussion is closed to new replies.