Discussion Locked

Internet connection sharing?

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am having trouble getting my internet connection sharing going. I had it setup and then had to reinstall Windows (98se) and now I can't get the other computer to access the internet even though the main one does. All file and print sharing are functional. I have tried this both using automatic IP addressing and by assigning IPs and it still won't work. I connect to internet via cable modem. Got any ideas???

7 replies

by yuval

When you are using static IP address: make sure you are typing corect IP,Subnet mask, and Default Gatway. the 1st step to check your connectio: ping the gateway (ping 192.168.0.1). if it does not work check your network connection (cables and 'link'light at the Network adapter (NIC)). step 2: - try pinging a server ouside your network (204.71.200.245). if it does not work - check your connection to the internet and your internet sharing. Step 3: rty surfing to the above address. it sould work.now all you have to do is to config your coputer with the ISP DNS servers... and ...have a nice day.

by navster2

This did not work because all of my network connections were live-I just could not get the ICS to work-thanks for the answer though.

by dmiles

Go back to networking configuration and check the proxy settings and make sure you have correct settings disable the WINS configuration.

by tommy.leerschen

Both answers above are great, but try these things too. Check the properties of your browser, in IE there is a setting for "automatic discovery" of proxy. Make sure that it is enabled. Or, create the ICS share disk and run it on the other workstation. Also, check your nic card settings in ICS. Make sure that the right card is set for the network and ICS

by navster2

While this didn't actually solve the problem, it prompted me to start over by uninstalling and then reinstalling ICS on both computers appropriately. For whatever reason, it worked after that.

This discussion is closed to new replies.