Discussion Locked

Internet Connection Sharing with Win 200

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I am running win2000 server on a 866 Micron P3 using 384 mb ram. I recieve
an ISP connection on my server through a digital provider. I have shared
that connection through a 2nd NIC adapter on the server.
The connection works fine on all theclient PC's except for the fact that I
cannot download on the the client connections. I do not have a firewall that I know of and have checked security settings on all the browsers.
Im hoping that one of you more skilled in this matter can help me.
Thank You for your assistance,
tavarish

2 replies

by buzz70_98

When you try to download, do u, get any errors. If you do, I need to know what they are. Second question is: do u have a router? I had a situation where we could browse the internet and send email as long as they did not have large attachments. The problem was thatt the router port had a limit set on the size of packets that could be sent out or received. If you don't have a router, there might be a setting on the server because when u set it up the server the way u said, the server acts like a router. There might be a similar setting on the server. I am not that familier with W2K yet, but u can check out tech notes on microsoft site for that specific issue. Otherwise, I need more info on what errors u are getting. One more thing,if u log on as system admin on a local workstation do u still have the same problem (it is just a quick check of if it is a permission issue),

by tavarish

Buzz70 got me thinking about the solution to the problem. It was completely linked to the Default Maximum Transmission Unit or (MTU).

Solution;
On my clients, I performed the following test to determine MTU.

Open a DOS/Command Prompt and type
"ping -f -l 1426 www.tavarish.com"

If you get "Packet needs to be fragmented but DF set" you must reduce the packet size from 1426 to a lower value (e.g. 1424 or 1420) and repeat the test again.

If you get replies from your ISP, you will then use this packet size as the MTU setting for the system.

On the client system specify the determined MTU (MaxMTU). In Windows, you need to change the MaxMTU setting in the system registry for the network adapter being used to communicate with the server computer.

Back up your system registry before making changes to it.

In Windows 2000 go to;
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\MTU="1462" (DWORD Value)

If you are unclear on which {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} folder is your current Ethernet Adapter, exit registry editor, go into your Ethernet TCP/IP setting under network configuration, enter an IP address manually, close and reboot the system. After reboot, get into the registry editor and locate.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\IPAddress

You will then find one of these {Key} folders contains the data (e.g. 192.168.0.2)" you have just entered. Once you have found the proper registry entry, click on "Edit", "New", "DWORD Value", type "MTU" and , right click on "MTU", select "Modify", select "Decimal" and then enter "1462". Save the registry, close the registry editor and reboot the system.

If your having trouble with ICS and have a DSL (PPOE) connection, try this fix.
Thanks buzz70:-)

This discussion is closed to new replies.