Discussion Locked

Intranet Web Server Hiding

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a switched PC network consisting of a Cable Modem, 3 PCs running Windows 98, a PC running Windows NT Server 4, and an Appletalk subnet with 7 Macs connected via an additional hub. Most of the machines (excepting the server) have their TCP/IP settings configured for DHCP, so they can use the cable modem for Internet Access. The NT Server is running Internet Information Server 4, and I would like it to deliver html content to all the other computers, while at the same time, all the other computers can still use the cable modem with DHCP. The server used to be a Proxy Server for ISDN Internet, but since the cable came along, I've tried many times to connect to the server as a web server - it still works fine as a file server through Network Neighbourhood on PC and Chooser on Mac. How can I resurrect my server as an Intranet Web Server without disrupting the Cable Internet Access? Thanks.

7 replies

by corky132

If MS Proxy is still on that server, go into the Proxy Server manager in the MMC, right click on Web Proxy.. goto the publication tab.. and choose "Requests to the server are... sent to the local web server.." By default, it probably has "discard"..since it's a firewall. You should then be able to access it by http://myserver.. (it should bring up the default web site) .. look at the permissions on that web.. (NT challenge response or anonymous)

by inspectorclave

With Proxy Server in place, it was doing NAT (Network Address Translation). That is, your non-routable DHCP addresses on your LAN were translated over one real IP address on the Internet to allow all computers on the LAN to have Internet access over one IP address. If you want to run IIS, you shoud have a dedicated IP address bound to only that NIC (in the IIS server). Otherwise, you will be pushing you IIS traffic and LAN Internet traffic through the same IP address. This is possible, but not recommended. If you do not have Proxy installed and configured (and/or you don't want to reinstall it). Then once you have the IP address for your IIS server, you need to notify the ISP you are using and give them your DNS server IP address so that they will forward all http traffic to your server. That should be everything.

by calves

If I understood correctly, you just need to add another IP address to your NIC (it can hold as much as 4 IP addresses). So that, the second Ip address becomes the site (intranet) IP address without disrupting the cable access. It seems to me everything else works fine, so just dedicate a second Ip address to the NIC, by going to the TCPIP properties, then in IIS change the IP address of the Web site to the new IP you just bounded to the NIC, then make changes to the host file or DNS server, whichever you use in your network.

Good Luck!

This discussion is closed to new replies.