Discussion Locked

ip address name resolution

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Is there a command that you can use that will resolve an IP address to the pc name that is using it? We have an address that replies when you ping it, but can't figure out the regular name. Also if you go to start, run, and enter \\ip addres\c$ weget an error saying that the network path was not found.

5 replies

by todd o.

A network sniffer will discover all the devices on your network and show you their NetBIOS names and IP addresses. Try a demo version of WildPackets' EtherPeek for Windows and see if it turns up the information you need. (I have not used the demo version, so I am not sure if it is crippled in such a way that it won't find what you are looking for, but the full version would handle it just fine. Give it a try.)

http://www.wildpackets.com/products/demos

Another idea is to use the "net view" command to see the user name an shares associated with the IP address, which might give you enough information to track down the machine you are looking for. The syntax is "net view \\" entered from the command line. If you can narrow it down to a few machines, you can ping each one but their NetBIOS names and the Ping command will resolve the IP addresses of each and display it for you.

by jason.barnett

ping -a x.x.x.x

if the device has a netbios name it will be returned, if it does not (i.e. it's a router or other device) then this will not help.

as you can't map to the admin share on this machine it sounds like it's not a NT PC. try net view x.x.x.x and see if there are any other shares listed.

also try nbtstat - A x.x.x.x to return the netbios table.

if this doesn't work, take a look at your DHCP server and see what it thinks it has assigned the address too.

if all else fails then it's sniffer time, and this will cost for a decent product.

good luck,

jb.

This discussion is closed to new replies.