12 replies
by dpenrice
I'm not quite sure I understand your question. Is it meant to be "who" and not "how"?
But this might help :- from a Workstation or Server Command Prompt, type NBTSTAT -a xxx.xxx.xxx.xxx (x=ip address)
This will show you a list of computers andgroups plus the mac address assigned to that IP address.
I hope this helps.
Dave.
by aspiring_one
Open a command prompt and type the following:
ipconfig
This will display a summary of the IP address, mask, and gateway that is assigned to each network adapter. For more details on each adapter, type "ipconfig /all" instead of "ipconfig".
by aspiring_one
by mckaytech
If you are running WINS, you can go to WINS Manager and click Mappings, then Show Database. Click the tab to sort by IP Address and scroll down the list to find the IP address. On one of the lines associated with that IP Address, you'll see the username of the account currently using that IP.
regards!
paul
by aspiring_one
by jmiller
How does this work in reverse for resolving a name to an IP address?
Thanks,
Jimmy
by aspiring_one
by wildmcp
You can perform an NSLOOKUP from the command prompt for the IP address - which should pull the name, IF you have reverse lookup enabled. You can also do this in reverse, by using NSLOOKUP to find the machine name and it will pull up the ip address(es) associated with that name.
c:\>nslookup monster
or
c:\>nslookup 1.2.3.4
uses your configured DNS server to pull the IP address. This is what you have configured on the DNS tab in the TCP/IP properties window.
by aspiring_one
by mike.batters
If you use ping -a xxx.xxx.xxx.xxx it will query the host you are pinging for its name. Once the reponse starts to ouput to the screen you should get the hostname at the top, resolved to the IP Address.
Mike
by aspiring_one
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending