Discussion Locked

IP addresses not working

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On our network we use DHCP, but recently those IP addresses won't browse to the Internet. We can get to everywhere on our internal network, but not to the Internet. We switch these people back to a static IP and it works. Then a few days later the static IP might not work, we go back to DHCP and it works again. We also have a PIX firewall in place. Can anyone offer an idea as to why this might be happening and a way to fix it?

5 replies

by Former member

I would begin by diagnosing the problem with pings and traces. Traceroute ping and see if it stops at the PIX. Check the PIX box and do some traffic debugging. If you're using the same addresses, gateways and masks in the DHCP scopes as you are using static addressing, then it should'nt make a difference...

by ebob

1 - Do you "get to (your) internal network" by NetBIOS names or using "real" TCP/IP? If NetBIOS, then when you are next having problems connecting to the Internet, try connecting to some internal service using TCP/IP (preferrably use the IP address). This might help to identify the source of your problem, along with the PINGs and TRACEs alreay mentioned.

2 - I'll bet you've already looked at this, but I'll guess there are duplicate IP addresses on your LAN. Perhaps there is an overlap in theDHCP scope with the "fixed" IP addresses, or the esclusions in the scope are incomplete (or getting fiddled with by an unqualified assistant Admin...). Next time you're having problems, try PINGing the PC that is having the problem from some TCP/IP-only system (like your PIX: ping inside 10.1.1.1). You can also dump your ARP tables on one of your PCs (offhand I forget how...) and see to which MAC addresses match which network addresses - if you get that desperate.

This discussion is closed to new replies.