Discussion Locked

IPX/SPX and TCP/IP communication

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

My network consist of 1 Novell Netware 4.11 using IPX/SPX as the protocol
to communicate with all the clients and 1 Windows 2000 server running on TCP/IP protocol.
I would like to reduced the multi protocol in my network environment to ease the congestion
on my LAN.
I would like to know is it posibble for my Novell Netware 4.11 server to communicate with all
the clients and Windows 2000 server after I converted my Novell Netware 4.11 server from
the running IPX/SPX protocol to TCP/IPprotocol to make sure my LAN is running solely on
TCP/IP only.
Thank you.

11 replies

by spiceman

You can run purely IP in netware 5.0. It's also possible to run this in 4.11 and you should not have any problems connecting to the rest of the network.

by gmcnslt

You COULD run it with netware/ip.. but that is encapsulation.. not very good.. sorry... need to go to NW5.1 (skip 5.0 it is buggy)

by luis_a_delgado

I would wait for netware 6, it's only a few months away and well worth the upgrade if you're still running 4.11. It's time to upgrade.

This discussion is closed to new replies.