Question Locked

Is it possible to enable onboard video card with PCI-E card?

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently bought a Dell Dimension E521 desktop. It came with NVIDIA GeForce 6150 LE Integrated Graphics card. I installed NVidia 7600GS card with dual DVI out yesterday. I have 3 monitors, 2 connected to the DVI ports on the 7600GS card and was wondering if there is a way, I could use the 3rd one on the integrated one? I wasn?t able to get the integrated one enabled after installing the PCI-E card.

Anyone have any solutions? OR I have to get another PCI video card?

Also, will DVI splitter help? I know with the splitter I can connect two monitors to one dvi output, but will this allow me extending my desktop? I don?t want to get the same screen on two monitors.

Thanks.

12 replies

by hal 9000

When you add a PCI X Press Card and even if it wasn't it would still show the primary Display.

As for using a DVI Splitter you can but this normally results in the same display on both Desktops on that DVI Socket. However Dell did have a DVI Splitter that allowed you to extend the Desktop over 2 monitors a while ago. They may still be available but I haven't see on in ages so I'm not sure.

Col

by bcon92001

Hey Innextek, this is more of a question about your situation than a solution. I too bought an E521 and was told you could not upgrade the video since it was integrated. You had no problem installing the 7600GS ? without any problems ? How about a 7900 GS? I am very curious about this please advise . thanks

by tyler1

I am having the exact same problem as the original poster. Did you guys ever resolve this issue??

by bobjb

"This question is so old... o-well"

Yeah, Check the BIOS. See if you can change the default display adapter to your on board GFX card. Then try setting it up. This should allow windowz to see both cards.

Also, If its possible keep the on board from getting disabled, the BIOS is where you would do it from.

(witch isn't likely because 90% of users with expansion cards don't use the on board)

-Oblivion

by rijatru

Hi

Yes you can use onboard and pci express cards at the same time. Just configure in the BIOS the onboard as the main video adapter.

Then you could use even 3 monitors with extended desktop.

Go to display properties and in the 2 and 3 monitors selects the checkbox (extend my desktop to this display).

This works on Windows XP and 7. Vista and wddm 1.0 can?t run multiple video drivers.

by mgg

Every motherboard I have seen with onboard video, this isnt possible, although some say it is on theres. Why I dont know, seems so stupid, surely the manufactures could program the BIOS to allow it.
Perhaps if the onbard is AGP, and you use a PCI(-e) card, you may have luck. If they are both AGP, certainly not.

by solardesigner

I am dealing with the same issue. I have an Inspiron 546 witha quad core and integrated Radeon HD3200 and they told me I could use all 3 but now they say no. I would like to do it, or at least have a good solution for a 2nd card or 3 head. I got a Radeon 9250 and then discovered it only had Direct X 8.1 and I need 9 for win 7. I'm now trying to get a PCI card that supports DX9 because I only have 1 card slot for PCIE and am using it with the Radeon 3650 dual. any input??

by srysull

I just went through tech support at Dell. The support rep said there is no way to enable the onboard video card when a PCI-E card is installed.

Also, using a splitter does not create a unique screen. Rather, it duplicates the video source onto two screens.

by psford

You can split the signal. The computer setup I'm using now is a 3 monitor set up. The computer is a Dell and it has two GFX cards. One card has the DVI splitter running two monitors and they are not mirrored. This is at my job so I have no idea where they got this cable or how much it costs...but its here.

by it_inserts_the_username_here

Even though this question is very old, obviously people are curious as I was searching here for an answer as well.

First, if the computer you are using has two graphics cards, I am assuming they only have one output each, otherwise it wouldn't need an additional cable for a three monitor setup. Most newer cards have two or more outputs which would allow for a three monitor setup natively.

A simple DVI splitter would mirror the two monitors. These usually run from about $10 up. The DVI splitter you are speaking of is probably not one of those simplified cables, but rather something like the Matrox TripleHead2Go or similar technology. These are quite expensive, and around the $300 retail mark.

I am still doing some research on enabling the on board VGA in conjunction with the PCIe, and will update this post if I am able to find anything out. I do believe one of the other posts on this thread were correct in saying that it is probably a board manufacturer option, if it is even possible at all that is.

by thundercatvob

Greetings,
A few days ago I have managed to get both my PCI-E card and onboard card to work at the same time. With this I managed to have 3 monitors running.
I own an Nvidia GeForce 9400GT with one VGA port and another DVI port, and the MB has an onboard 7025 card. Installing the drivers of the onboard card while the BIOS settings mentioned that the PCI-E card was the primary card did not work. However, I tried setting it so that the onboard card is the primary one, and once I booted, Windows recognized both the cards, enabling me to run 3 monitors.
I should also mentioned that I downloaded and installed a single driver file for both 7 and 9 series. But I'm not sure that made a difference.
Have a nice day.

This discussion is closed to new replies.