Some direction you may get by adding some kind of reflector about 1/2 wavalength behind the antenna, and possibly mounting a 5% shorter parasitic element in front of the antenna.
Look at http://www.yagiantenna.net/ for inspiration.
I like your approach, since a lot of people unsidedly want to raise the AP output power, which may get a bigger area to hear the signal from the AP, but since it doesn't raise the sensitivity of the AP's receiver, it wouldn't help much.
(BTW, some mobile network operators do the same trick, they use high output power to create a "good signal" all over the place, in the basement etc. But if the phone can't reach back to the network, then no calls can take place, and you can't use your phone, despit 5/5 on the signal strength bar...)