Discussion Locked

ISDN access sharing on networked W98 PCs

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a 5 PC system linked together on an 8 port hub all running Windows 98 SE. One PC has a USB Terminal Adaptor for our ISDN line.

The system is set up to allow file and printer sharing, but we want to be able to send and receive e-mails, and access the Internet, from any PC via the ISDN. At the moment, we can only send and receive e-mails via the PC directly connected to the ISDN line.

Should we be able to share this connection, ideally we would want to automate our e-mail sending such that the ISDN dialled to send and receive when our outbox got to, say, 2Mb or 10 messages, or every hour.

We are a small business and don't want to spend mega-bucks on new servers and software, but also haven't got time to trawl theInternet for lower cost software bolt-ons which may or may not give us what we need.

Can it be done, and if so what's the likely budget?

4 replies

by matt at canon

As far as I'm aware Windows 98 does not have the ability to share out a Dial Up Connection. However Windows 2000 does. You would only need to upgrade the machine phisically attached to the ISDN line to W2K. You could then set this machine up as aGateway, which thwe other PC's could access the Internet through, I know it works, I use it at home.

Hope this helps,

Matt

by mjervis

You have a couple of possibilities depending on your needs.

1. Linux - and old 486 dx 66 with 64 megs of ram and the free linux operating system installed can do wonders for a small network like you described. It can also do your file and print sharing so that when the person who normally works on the computer you are currently sharing through isn't at work you lose no productivity. An old 486 can be bought cheaply also and the linux operating system is free.

2. Modem share from lantastic. Cheap program works well in windows 9x environments for internet sharing.

3. Wingate - another modem sharing program that works well and easy to use not very expensive.

This is three ideas off the top of my head another idea is a dsl/cable/isdn router typically these run about 100 bucks or so and they also work well.

Feel free to contact me at mjervis@thompsonmailing.com if you have any questions.

by drmorton1

I do not know if you have received a reply yet, but the answer to your question is, yes.
You need to setup a proxy server. Then connect the router to the hub. This will allow all the users acces to the ISDN connection. You can get a small router for $200. and then setup the server ware on one the computers. Or, you can purchase MSN small business back-office server that has everything you will ever need for your network already to go. This is a network OS and it retails for $1,500.

by brian.flett

I have just come across this thread, and I came up across this problem 2 months ago. We have a small LAN connected to a 16-way HUB. The ISDN line comes into an ISDN modem. Internet Connection Sharing is built into '98 SE, just go into help and follow the internet connection sharing overview. It is very easy to install, with the ISDN enabled computer being the host computer, sharing to multiple computers (this is all without having to buy extra software, routers or setting up proxy servers). Hope this is of some help.

This discussion is closed to new replies.