Discussion Locked

Its time for the upgrade

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have purchased a new machine. Currently the old one is running 98. I would like to know the quickest and safest way to move the data off the old drive to the new. I could slave the old drive but????? any suggestions. O yes it xp home on the new one.

7 replies

by borginva

For your personal data you can easily transfer the data, but for installed programs, you will have problems transfering them from 98 to XP for there are different files involved and registry stuff. Your best bet to my knowledge is to reinstall thoseprograms on XP, if they will work under XP.

by ann777

Moving data is best accomplished by making the old drive a secondary drive and using Windows Explorer to copy your data to the new drive. XP will "see" 98 files and this should not be a problem.

You will need to reinstall any programs and applications that you regularly use.

by thechas

I agree with making the old drive a slave on the new system as being the 'fastest' way to transfer the files.

Just be sure to set the jumpers on both drives correctly, and to set the jumper back on the new drive.
You may also need to enter BIOS setup, and adjust the IDE settings to detect the old drive.

The biggest caveat, is if the old drive has a BIOS overlay program installed to allow a larger hard drive to function with the old system's motherboard.

If you have any concerns about making your old hard drive a slave on the new system, you can 'network' the 2 PCs, and use the built in file and settings transfer wizard.

You can use network cards and a cross-over cable, or USB, Serial, or Parallel data transfer cables.

Chas

This discussion is closed to new replies.