Question Locked

I've got A Tyan Trinity S2380 that keeps rebooting during XP setup

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
XP PRO starts to load and goes through the format stage...loads system files and when it's time to reboot and role into the install the bios goes to the press F! to continue. At that point the process starts all over. F8, F6 Esc, Tab don't work to get the menu to disable this...HELP

8 replies

by Former member

Clarifications

by darryl~

See the following post....

https://www.techrepublic.com.com/5208-7343-0.html?forumID=101&threadID=331388&messageID=3300114&tag=content;leftCol

seanferd & I have been giving him some suggestions....also....they have replaced the motherboard, power supply, HDD (which had a previous XP installation on it)...some other stuff before you go through the same things we already did.

Now that we have you on the case, I know it'll get solved ;)

by santeewelding

Restrict yourself to the technical. Ain't no joking allowed here, didn't you know?

by darryl~

just what are you thinking about?

hummmmm

by bodonnell11

my guess is that a file necessary for loading of xppro is corrupted therefore it is necessary for you to reinstall xppro again.

by Former member

I did replace the bios batt. removed 2 of the 3 sticks of ram and then ran 98 boot disk and wiper the drive, set a DOS partition and started back with the XP Pro and all went well. Thanks for the advice.

This discussion is closed to new replies.