Discussion Locked

Jumping Jack Flash

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am trying to flash my "new" Dell KVM switch a 2161DS. I am using Hyperterminal Private Edition 6.3 and a Compaq Proliant DL380 running Win2KAS.
I keep getting a 'Flash Download Failed:Internal Error" after trying to flash.
Tried it on several PC's also and still get same message. Thought file was wrong so I downloaded a differant flash img file and still the same.
Any ideas would be appreciated. I have the HT set to the factory suggested settings and still nada!
What gives?

1 reply

by dburns4

I just had this issue with an Avocent 2020 KVM over IP unit. My solution was to do incremental firmware updates: start with the next newer flash upgrade than the unit had and work my up.

According to Avocent's FAQ the unit had a new enough firmware to jump up to the newest release in one flash. Apparently that was not the case.

This discussion is closed to new replies.