3 replies
by joseph moore
Well, I don't know Lantronix machines, so the easy answer is to suggest you check out their web site (www.lantronix.com).
Now, I would plug a workstation into the Lantronix printer directly using a crossover cable. You might then be able to telnet into whatever default IP address the printer assigned itself. Sometimes, you have to change your workstation's IP address to the same segment as what the device is set to. For example, if the printer reset itself to 192.168.254.37, change your workstation's IP to the same range (192.168.254.x). Give it a default subnet mask. You could then connect to the printer.
You could even try connecting to the loopback Ip address (127.0.0.1).
And, I guess using the browser would work this way also.
Butthe crossover cable to the device is one way to go.
Hope this helps.
by david.lew
by david.lew
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending