Discussion Locked

LAPTOP DOESN'T SEE FLOPPY DRIVE

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have a Dell CPI P500 laptop with a peculiar problem.

When UNdocked, its A drive functions normally.

When DOCKED, it sees the A drive but when it tried to use it, the system freezes.

We've tried different docking stations, a new system board has been installed, and the BIOS has been updated. We're stumped!

10 replies

by mphoffar

I would suspect there's a floppy hookup somewhere on the dock that the system thinks is the one to use instead of the internal or there is some sort of dock driven floppy controller that isn't loading or defined in the device manager.

Good luckto you

Mark

by scripteaze

just a though

was this laptop imaged using ghost or some other product? If so whoever made the image didnt have the floppy connected durring the image creation.

OR

The bios needs to be upgraded.

by nick lowther

It may be worthwhile checking your hardware manager to ensure that the floppy device hasn't been disabled when docked!!

by rraheb

Your laptop can have multiple hardware configurations, check if this is the case and if so make sure that the floppy drive is enabled in docking mode.

One more thing, if you're connected to a domain when your laptop is docked check with your system adminstrator that there isn't a security implemented which disables the floppy drive for information security purposes.

Hope this is helpful...

- Rafik

by bdgray

If you have a floppy drive in the docking station it will be the A: drive and the one in the laptop will either be disabled or drive B:

This discussion is closed to new replies.