Windows Forum

Ask something
Discussion Locked

laptop hard drive problem

0 helpful
8 replies

by techjunkie

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I need to get data from my laptop hard drive to my desktop pc - the power connection on laptop has broken/battery not holding charge - have a IDE 2.5 adapter and plugged into desktop pc. Laptop hard drive visible and files I need, but can't copy/paste from laptop to desktop - get error message "access denied". Sharing not worked, but can create a folder. Any ideas how i can overcome the access problem?

8 replies

by cmoher

Restart your computer in safe mode, then try copying files. That should work.

by hal 9000

You use a 2.5 USB connector. That way the 2.5 inch HDD can not be seen as a valid Windows OS and you should be able to copy data files across. Unless of course you have something installed on your desktop PC to prevent this from happening.

If that is the case you would have to disable it and start again. With the 2.5 adapter it is just possible that the PC is booting from the 2.5 inch drive instead of the one in the PC.

Col

by techjunkie

I've checked CMOS and it's definite not booting from 2.5 drive.... logged on as Admnistrator - certainly some type of permission issue - now I did have to put in a password when I logged on when the laptop was working - would it be that without the password the access problem is occurring - can you suggest how I get round it?!

by hal 9000

If it was just the Windows Log on there shouldn't be a problem but if you have encrypted the data and password protected it then that could be the problem.

If that is what you have done you'll have to boot from the 2.5 inch drive and load whatever divers are required in the PC and then enter the passwords as required. Then you will be able to transfer the data across to the other drive. But it honestly sounds simpler to just get a new AC adapter for the LT and then network the two together and transfer the files across that way it might save you a lot of time and effort.

Just another thought did you set the jumper setting on the 2.5 inch drive?

When these are used in LT's they generally do not need setting and are left off but in a PC you'll need to set the jumper so it can be properly accessed by the PC.

I really do not like the 2.5 to 3.5 adapters for this reason and I prefer to use a USB interface as it solves a lot of the problems associated with using different technologies on the same platform.

I hope that gives you somewhere to start from.

Col

by dafe2

Along with some of the things discussed, some of the newer Laprops have included a "feature" called drivelock.

If this was used (in this case) I believe Hal9000's advice to repair the unit would be your only alternative for data recovery.

The symptoms you describe a little 'familiar' to me.

by techjunkie

I took ownership via the properties of the folder and changed the security permissions - et voila problems solved, so very grateful for all contributions :)

This discussion is closed to new replies.