Discussion Locked

Lexmark X83 networking

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a home user with a Lexmark X83. Works great with the USB. However, It won't network with the wife's Win98SE machine in the kitchen. It sets up fine according to the printer installation software and shares when asked. When they go to print anything the popup rises and the machine locks. Lexmark says they don't support Networking the X83. NOW they tell us!! Any assistance or ideas?

7 replies

by Member 36317532

This may help

It is from Technet and deals with Win98
and not identifying USB printers.
Have a look on MS support

PSS ID Number: Q268656
Article last modified on 09-07-2001

Good luck

by ferrierj

Looks good. Now all I have to do is get Lexmark and MS to actually talk to each other :)

Lee Ferrier
ferrierj@pacbell.net

by Member 36317532

Ok pint taken.
At my last place of employment we did have several X83 printers and we used them on a Network. But they where connected via parallel port and then shared through the user. They did work in that config without any problem. I know thatdoes not help your current prob but you may need to consider it
Good luck

by ferrierj

Thanks. That was the answer. I just had to buy a new printer cable :)
I appreciate the assistance. I was looking for the complicated answer, not the simple solution. After 25 years in this business you would think I'd have learned!

by Member 36317532

The reason I did not suggest it in the first place is because of the unknown quantity of experiance on your part, if you get my drift.

But glad all turned out ok

Regards
Andy

by tswadley

I have tried numerous times to share a printer between two computers via a USB hub. Last school year, this printer was shared but I am having an extremely hard time with it this year. Our OS has not changed and the way the printer is connected has not changed. Lexmark advises that it cannot be shared but I know it can because it was last school year. Any assistance would be greatly appreciated!

by info

It appears that some of you have connected the X83 using a parallel printer cable rather than the USB, to enable sharing the printer over the network.
Don't know if I'm doing something wrong here, but I don't see a parallel port on the back of the printer. Does this mean that I need some sort of USB - Parallel converter???

This discussion is closed to new replies.