Discussion Locked

Link conundrum - DB15->RJ45-Possible?

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Newbridge Mainstreet 2701 DTU (DSL) with a DB15 device port. I could save over $500 for many clients if I can connect this port to an RJ45 port of a Cisco 827 router. The manuals show many other types of possible conversions but I feel that this connection can be made. The link speed is 128kbps. can anyone help? Kizito in Uganda.

9 replies

by 1networker

Hello Kizito,

Yes, DB15 to RJ45 adapters do definitely exist. They are not readily sold in most stores, but can be ordered, custom-made, from a variety of different companies. Hope this information will help.

Jeff from US

http://www.cisco.com/univercd/cc/td/doc/pcat/se____c1.htm#xtocid129818 ? Cisco?s example of a DB15 to RJ45 jack adapter. The name of the part is ?CAB-E1-PRI?
http://www.cableconn.com/products/modular/rj45.htm ? Cable and Connector Technologies - Prices on a few DB15 to RJ45 jacks
http://www.action-electronics.com/ppad25.htm ? Action Electronics - another company that sells the cables
http://www.commcable.com/wan.htm ? Communication Cable Company - custom makes DB15 to RJ45 adapters
http://www.interlinkweb.com/prodinfo/7bb2.htm ? ICS ? 50ft DB15 to RJ45

by mckaytech

Unfortunately, the physical connection is only half the battle. The DB15 connector on the Newbridge unit is a serial interface (x.21/EIA-449) and the RJ45 connector on the Cisco 827 is for ADSL format signals only. So in addition to the physical connection, you would have to provide format translation as well and I don't, offhand, know of a product that will do that for you.

If you're just trying to share a DSL connection, a NAT router inside the Cisco will accomplish that although I recognize that cost is probably an issue.

regards!

paul

by jolly roger

It sounds like what you are attempting is impossible. If you look at www.newbridge.com, you'll see that they have been acquired by our French friends at Alcatel. The documentation on that website seems to imply that a 2701 requires other Alcatel equipment to function. The following text is from that site and they seem to think the interface is DB25? Try calling Alcatel - maybe they'll swap the 2701s for something that will work for you!

2600/2700 MainStreet Family
Data Termination Units (DTUs)
Technical Summary
Features

2601/2612/2701/2751E MainStreet DTUs

ports: dual V.24 / TIA/EIA-232
connectors: DB25
physical interface: TIA/EIA-232C, CCITT V.24/28
mode of operation: DTE/DCE
control signals supported: RTS, CTS, ALB, RDL, DCD, DSR, DTR, RI
variable character length: nine, 10 or 11 (start, data, parity, stop bits)
rate adaptation: HCM

This discussion is closed to new replies.