6 replies
by bdgray
Linksys cards require you to set up the IRQ, I/O range and cable type in a DOS based setup program. If you don't have there setup disk got to:
http://www.linksys.com/scripts/dlc.asp
Also a standard NE2000 compatible driver should be compatible with your Lynksys card.
by zharia
by formula
by zharia
by pinoy
Try deleting the "other devices", click it then click remove.
Then you try removing the device (nic card). And since the driver is already loaded, you can just restart the system, reboot. It should detect the nic card.
If the conflict happens again, try change the irq setting. double click linksys, change irq setting, use must use irq setting not used by other devices.....remember to remove the "other divices" bec you can never make it work unless this thing is removed.
by zharia
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending